OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
LORDWORLD
8 MP camera module with 170° field of view and 3280×2464 resolution for NVIDIA Jetson Nano AI projects
The LORDWORLD IMX219-170 camera module adds 8-megapixel vision to NVIDIA Jetson Nano Developer Kit projects. It uses a Sony IMX219 sensor behind a 2.2 mm focal-length lens with an F2.0 aperture. The board measures 32 mm by 32 mm and includes four screw holes for secure mounting. It draws 3.3 V power from the host platform.
The diagonal angle of view reaches 170 degrees, giving a wide perspective for face recognition, road mark detection and licence plate recognition. Distortion stays below 22 percent, which affects edge accuracy in measurement tasks. The 3280 by 2464 pixel resolution provides detail for close-range AI inference. Extreme wide-angle scenes will show noticeable barrel distortion.
Four screw holes allow rigid attachment to enclosures or robot chassis without extra brackets. The module supplies a 3.3 V power output pin for simple daisy-chaining of low-current peripherals. No additional drivers or software bundles are mentioned in the specifications. Builders needing narrower fields of view or global shutter sensors should select a different module.
| Brand | LORDWORLD |
|---|
Yes, the module is designed for the Jetson Nano Developer Kit and uses the board's native CSI camera interface for direct connection.
Run a GStreamer pipeline or the Jetson Nano camera test scripts; a live preview showing the 170° field of view at 8 megapixels confirms correct operation.
The module provides the 32 mm × 32 mm board with four screw holes; a compatible CSI ribbon cable and mounting screws are typically purchased separately.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟