نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Metal enclosure for Raspberry Pi CM5 IO board with cooling fan and 40-pin GPIO adapter

LORDWORLD

LORDWORLD Metal Case for Raspberry Pi CM5 IO Board with 40PIN GPIO Adapter and Cooling Fan

SKU CH-JQ36-H288V

Dust-proof metal chassis houses the Raspberry Pi CM5 IO board with a cooling fan, 40-pin GPIO adapter and wall-mount holes for industrial or DIY projects

  • Durable metal chassis protects the Compute Module 5 IO board from dust and impact
  • Integrated cooling fan and vent prevent overheating during extended operation
  • 40PIN GPIO adapter keeps standard header accessible for HAT expansion
  • Precisely cut and labelled ports give instant access to every interface
  • Dual-side mounting holes enable secure wall installation for industrial deployments

Metal Case for Raspberry Pi CM5 IO Board

This metal case is built for the official Raspberry Pi Compute Module 5 IO Board, giving makers and industrial users a dust-proof chassis for mini PC or edge projects. It includes a 40PIN GPIO adapter so standard HATs can be connected directly. Wall-mount holes on both sides support fixed installations in cabinets or PoE-powered setups.

Installation and Common Issues

The case aligns precisely with every port on the CM5 IO Board, and each cut-out is clearly labeled for straightforward assembly. The 40PIN GPIO adapter seats onto the board header before the lid is closed, preserving the standard pinout for HATs. The only extra step is routing the included cooling fan power to the board’s fan header; forgetting this connection leaves the fan inactive.

Capacity and Headroom

The enclosure handles continuous operation of a Compute Module 5 under typical industrial or DIY workloads, with the fan and vent moving air across the module. It runs out of thermal headroom when the CM5 sustains maximum CPU and GPU load for extended periods without additional heatsinking on the module itself. The single 40PIN header also limits expansion to one HAT at a time.

أبرز المميزات

  • Durable metal chassis protects the Compute Module 5 IO board from dust and impact
  • Integrated cooling fan and vent prevent overheating during extended operation
  • 40PIN GPIO adapter keeps standard header accessible for HAT expansion
  • Precisely cut and labelled ports give instant access to every interface
  • Dual-side mounting holes enable secure wall installation for industrial deployments

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

How can I confirm the cooling fan is operating correctly after installing the Raspberry Pi CM5 IO Board?

Power on the board and listen for the fan spinning; airflow through the vent should be felt, and the CM5 should remain at safe temperatures during sustained workloads.

What components are included in the package and what must be sourced separately?

The package contains the metal chassis, a pre-installed cooling fan, and a 40PIN GPIO adapter; the Raspberry Pi Compute Module 5 and its official IO Board are not included and must be purchased separately.

Which version of the 40PIN GPIO adapter should I select for my Compute Module 5 IO Board?

The case ships with a single 40PIN GPIO adapter that matches the standard header on the official Raspberry Pi CM5 IO Board, so no alternative versions need to be chosen.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.