نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with M.2 E-key slot and 16-pin ribbon cable attached

LORDWORLD

LORDWORLD PCIe to M.2 E Key HAT for Raspberry Pi 5 16PIN

SKU CH-VQCH-2W0HF

Adds an M.2 E-key wireless NIC to a Raspberry Pi 5 via 16-pin PCIe and routes Bluetooth through USB with an onboard SMA antenna connector

  • Adds Wi-Fi or Bluetooth to Raspberry Pi 5 via M.2 E-key slot
  • Connects through the 16-pin PCIe cable for direct board access
  • Accepts both A/E-key and E-key wireless modules for flexible choice
  • Routes Bluetooth signal to the Pi over USB for simple integration
  • Onboard SMA female connector lets you attach an external antenna easily

Target Platform and Purpose

This HAT adds an M.2 E-key slot to the Raspberry Pi 5 using its 16PIN PCIe interface. It accepts A/E-key and E-key wireless NIC modules and routes Bluetooth signals to the Pi through a USB connection. An onboard SMA female connector allows external antenna attachment for improved wireless range. The board is aimed at makers and developers who need to add Wi-Fi or Bluetooth capability to a Pi 5 project.

Build Integration Requirements

The HAT connects to the Pi 5 via the supplied 16PIN cable and occupies the PCIe lane on the single-board computer. An M.2 E-key wireless module must be sourced separately and installed on the HAT before the assembly is mounted. The USB link for Bluetooth consumes one USB port on the Pi 5. The SMA antenna connector requires a compatible antenna and cable, which are not included with the HAT.

Sustained Operation Behaviour

During continuous data transfer the wireless module draws power through the Pi 5 PCIe supply and the USB link, so the Pi’s own power budget must accommodate both. The SMA antenna connection maintains a stable RF path under prolonged use, reducing drop-outs compared with onboard chip antennas. Thermal performance depends on the chosen wireless module and the airflow inside the enclosure, as the HAT itself has no active cooling.

أبرز المميزات

  • Adds Wi-Fi or Bluetooth to Raspberry Pi 5 via M.2 E-key slot
  • Connects through the 16-pin PCIe cable for direct board access
  • Accepts both A/E-key and E-key wireless modules for flexible choice
  • Routes Bluetooth signal to the Pi over USB for simple integration
  • Onboard SMA female connector lets you attach an external antenna easily

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

What limits the data rate when the HAT is used continuously with a wireless NIC?

The 16-pin PCIe link to the Raspberry Pi 5 sets the maximum sustained throughput for any attached M.2 E Key module.

Does the board add noticeable heat or fan noise during all-day operation?

The HAT has no active cooling; thermal load depends entirely on the wireless NIC you install and the Pi 5's own cooling.

Which wireless NIC must I already own for this HAT to function?

Any NGFF M.2 E Key or A/E Key wireless NIC that fits the slot and draws power from the Pi 5's 16-pin PCIe interface.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.