نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green rectangular circuit board with pre-soldered header pins, breadboard and jumper wires attached

LORDWORLD

LORDWORLD RP2040 Development Board Pre-soldered Header Breadboard Wires

SKU CH-YFKA-RYNJV

RP2040 development board with dual-core Cortex M0+ at 133 MHz, 264 KB SRAM, 2 MB Flash, USB 1.1, pre-soldered headers plus breadboard and wires

  • Dual-core ARM Cortex M0+ processor runs up to 133 MHz
  • 264 KB SRAM plus 2 MB Flash memory provides ample project storage
  • USB 1.1 device and host support enables drag-and-drop programming
  • RP2040 microcontroller designed in the United Kingdom ensures proven architecture
  • Pre-soldered headers with breadboard and wires let you start prototyping immediately

RP2040 board with pre-soldered headers

The LORDWORLD development board uses the RP2040 microcontroller chip designed in the United Kingdom. A dual-core Arm Cortex M0+ processor runs at up to 133 MHz with 264KB of SRAM and 2MB of on-board Flash memory. Pre-soldered headers, a breadboard and wires are included for immediate prototyping.

Replaces bare modules needing solder work

The castellated module normally requires soldering to a carrier board before use. This version arrives with headers already fitted so you can plug straight into a breadboard. The jump is worth it when you want to start writing code instead of assembling hardware.

Fits USB 1.1 workflows and low-power projects

Drag-and-drop programming works over the USB 1.1 device port without extra tools. Accelerated floating-point libraries on-chip speed up math-heavy tasks. Low-power sleep and dormant modes help battery-operated designs run longer.

أبرز المميزات

  • Dual-core ARM Cortex M0+ processor runs up to 133 MHz
  • 264 KB SRAM plus 2 MB Flash memory provides ample project storage
  • USB 1.1 device and host support enables drag-and-drop programming
  • RP2040 microcontroller designed in the United Kingdom ensures proven architecture
  • Pre-soldered headers with breadboard and wires let you start prototyping immediately

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

Does the castellated module require a specific carrier-board footprint?

The castellated edge lets you solder the module directly onto a custom carrier board; no special connector is needed beyond matching the pad layout.

What is the first step when setting up the board for drag-and-drop programming?

Hold the BOOTSEL button while plugging the USB 1.1 cable so the RP2040 appears as a mass-storage device, then copy the UF2 file.

Will the on-board 2 MB flash need replacing after many write cycles?

The 2 MB flash is soldered to the board and rated for typical microcontroller endurance; it is not user-replaceable.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.