نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black LUOM SA28 adapter with SATA and dual IDE connectors, USB 3.0 cable and 12V 2A power supply

LUOM

LUOM SA28 SATA/IDE to USB 3.0 Adapter with 12V 2A Power

SKU CH-N78B-F8JRH

Connects 2.5 or 3.5 inch SATA and IDE drives to USB 3.0 with 12V 2A power and 5Gbps transfer

  • ColorBlack
  • Changer TypeUSB to IDE&SATA
  • SpecificationsAll in One Solution to Connect to Different Types of Interfa
  • Package ContentsAll in One Solution to Connect to Different Types of Interfa
  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
  • Power 3.5" IDE drives with included 12V 2A adapter
  • Transfer data at up to 5Gbps with USB 3.0 speeds
  • Plug and play with no drivers needed across Windows and Mac
  • Operate three drives simultaneously using dual IDE and SATA connectors

Universal Drive Adapter

The LUOM SA28 connects 2.5 inch or 3.5 inch SATA and IDE hard drives as well as 5.25 inch optical drives to a computer through a USB 3.0 port. It supports SATA drives up to 10 TB and IDE drives of various capacities. The kit includes a 12V 2A power adapter and a 4-pin power cable for 3.5 inch IDE devices. An on/off switch and LED indicators provide drive protection and status visibility.

Upgrade From USB 2.0 Dock

This adapter replaces slower USB 2.0 drive docks or cables by delivering up to 5 Gbps transfer speed over USB 3.0 while remaining backward compatible with USB 2.0 and USB 1.1. The jump is worth it when moving large archives from legacy IDE or SATA drives where the higher bandwidth cuts cloning or backup time significantly. It also adds simultaneous operation for up to three drives, which single-drive docks cannot do.

Capacity And Headroom

The SATA interface handles drives up to 10 TB comfortably, making it suitable for modern high-capacity hard disks and SSDs. IDE support covers older 2.5 inch and 3.5 inch hard drives plus CD-ROM, DVD-ROM, CD-RW, DVD-RW and DVD+RW optical drives. The 12V 2A supply powers 3.5 inch mechanical drives reliably, but the adapter cannot power drives that exceed its current limit or require interfaces other than SATA or IDE.

أبرز المميزات

  • Connect 2.5" and 3.5" SATA or IDE drives via USB 3.0
  • Power 3.5" IDE drives with included 12V 2A adapter
  • Transfer data at up to 5Gbps with USB 3.0 speeds
  • Plug and play with no drivers needed across Windows and Mac
  • Operate three drives simultaneously using dual IDE and SATA connectors

المواصفات

BrandLUOM
ModelSA28
ColorBlack
Changer TypeUSB to IDE&SATA
SpecificationsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Supports drives with a capacity
Package ContentsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
No Drive Needed for Windows, Mac and Linux, Chrome
the included external power adapter will allow you to power your drives outside without opening your case. the plug and play function with no driving need, features works wonder with Windows and OSX saving your time and trouble,

أسئلة حول هذا المنتج

What drive sizes and connector types does the SA28 adapter support?

The adapter accepts 2.5-inch and 3.5-inch SATA drives plus 2.5-inch and 3.5-inch IDE drives with 40-pin or 44-pin connectors, and it also works with 5.25-inch optical drives.

Which connection step is most often missed when setting up the adapter?

For 3.5-inch IDE drives you must attach the supplied 4-pin power cable and set the drive jumper to master or slave before turning on the power switch.

When will the included 12 V 2 A power adapter need replacement?

Replace the power adapter if the LED no longer lights, the drive fails to spin up, or the unit enters sleep mode after 30 minutes of inactivity and will not wake.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.