نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black mid-tower PC case with four pre-installed ARGB fans and carbon-texture front panel

Montech

Montech X5 (B) PC Case Black ARGB Fans 410mm GPU 165mm Cooler

SKU CH-F18R-ZYVAZ MPN X5 (B)_Conf_20250619

A black mid-tower case supporting ATX and E-ATX boards with pre-installed ARGB fans, 410mm GPU clearance and a 165mm CPU cooler limit

  • ColorBlack
  • Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
  • Dust FiltersBottom / Top
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays2
  • Expansion Slots7

Option X5 (Black)

الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.

  • Ready for 410 mm GPUs including RTX 50 Series
  • Four pre-installed ARGB fans deliver airflow and lighting
  • Adjustable GPU holder prevents sag on heavy cards
  • Spacious cable routing behind large PSU shroud
  • Supports ATX, E-ATX, Micro ATX and Mini ITX

Build-ready case for high-end GPUs

The Montech X5 (B) is a black mid-tower chassis that accepts ATX, E-ATX, Micro ATX and Mini ITX motherboards. It ships with three 140 mm front ARGB fans and one 120 mm rear ARGB fan installed, so airflow and lighting are handled immediately. Two 3.5" and two 2.5" internal drive bays provide storage flexibility, while seven expansion slots accommodate full-length add-in cards.

Sustained airflow with adjustable GPU support

An adjustable GPU holder braces heavy graphics cards up to 410 mm long, preventing sag during long gaming or rendering sessions. The front panel design works with the pre-installed fans to pull cool air across the motherboard and GPU, while top and bottom dust filters keep the interior clean over time. An extra-large PSU shroud and generous routing space let cables stay organised, preserving unobstructed airflow paths.

410 mm GPU clearance decides the fit

The 410 mm maximum graphics-card length is the single dimension that determines whether your chosen card will fit. CPU coolers up to 165 mm tall and power supplies up to 230 mm long are also supported. Builders needing longer GPU clearance or additional drive bays should look elsewhere.

أبرز المميزات

  • Ready for 410 mm GPUs including RTX 50 Series
  • Four pre-installed ARGB fans deliver airflow and lighting
  • Adjustable GPU holder prevents sag on heavy cards
  • Spacious cable routing behind large PSU shroud
  • Supports ATX, E-ATX, Micro ATX and Mini ITX

المواصفات

BrandMontech
Part NumberX5 (B)
ColorBlack
Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
Dust FiltersBottom / Top
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots7
Fan OptionsBottom - 2 x 120mm / Front - 3 x 120mm / Front - 3 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm / Top - 4 x 120mm
Max GPU Length410 mm
Max CPU Cooler Height165 mm
Max PSU Length230 mm
Dimensions18.98" x 8,5" x 19.53"
وزن الشحنة9.96 kg
أبعاد الطرد552 × 533 × 277 mm

إصدارات أخرى من هذا الطراز

1 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How loud are the pre-installed 140mm and 120mm ARGB fans when the system runs all day?

The case ships with three 140mm front and one 120mm rear ARGB fans; noise levels depend on the fan curves you set in BIOS or software, but the large 140mm units can move ample air at lower RPMs, helping keep acoustic output modest under sustained loads.

What motherboard form factors and power-supply length does the case accept so I know my current parts will fit?

The chassis supports ATX, E-ATX, Micro-ATX and Mini-ITX boards and accommodates power supplies up to 230mm long, so most standard ATX PSUs will install without interference.

Will my existing 3.5-inch hard drives and 2.5-inch SSDs mount inside without extra brackets?

Yes — the case provides two internal 3.5-inch bays and two internal 2.5-inch bays, allowing you to reinstall your current drives directly.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.