暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black mid-tower PC case with four pre-installed ARGB fans and carbon-texture front panel

Montech

Montech X5 (B) PC Case Black ARGB Fans 410mm GPU 165mm Cooler

SKU CH-F18R-ZYVAZ MPN X5 (B)_Conf_20250619

A black mid-tower case supporting ATX and E-ATX boards with pre-installed ARGB fans, 410mm GPU clearance and a 165mm CPU cooler limit

  • ColorBlack
  • Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
  • Dust FiltersBottom / Top
  • Internal 3.5" Drive Bays2
  • Internal 2.5" Drive Bays2
  • Expansion Slots7

Option X5 (Black)

取り消し線の付いたバージョンは存在しますが、こちらでは取り扱っていません。

  • Ready for 410 mm GPUs including RTX 50 Series
  • Four pre-installed ARGB fans deliver airflow and lighting
  • Adjustable GPU holder prevents sag on heavy cards
  • Spacious cable routing behind large PSU shroud
  • Supports ATX, E-ATX, Micro ATX and Mini ITX

Build-ready case for high-end GPUs

The Montech X5 (B) is a black mid-tower chassis that accepts ATX, E-ATX, Micro ATX and Mini ITX motherboards. It ships with three 140 mm front ARGB fans and one 120 mm rear ARGB fan installed, so airflow and lighting are handled immediately. Two 3.5" and two 2.5" internal drive bays provide storage flexibility, while seven expansion slots accommodate full-length add-in cards.

Sustained airflow with adjustable GPU support

An adjustable GPU holder braces heavy graphics cards up to 410 mm long, preventing sag during long gaming or rendering sessions. The front panel design works with the pre-installed fans to pull cool air across the motherboard and GPU, while top and bottom dust filters keep the interior clean over time. An extra-large PSU shroud and generous routing space let cables stay organised, preserving unobstructed airflow paths.

410 mm GPU clearance decides the fit

The 410 mm maximum graphics-card length is the single dimension that determines whether your chosen card will fit. CPU coolers up to 165 mm tall and power supplies up to 230 mm long are also supported. Builders needing longer GPU clearance or additional drive bays should look elsewhere.

特長

  • Ready for 410 mm GPUs including RTX 50 Series
  • Four pre-installed ARGB fans deliver airflow and lighting
  • Adjustable GPU holder prevents sag on heavy cards
  • Spacious cable routing behind large PSU shroud
  • Supports ATX, E-ATX, Micro ATX and Mini ITX

仕様

BrandMontech
Part NumberX5 (B)
ColorBlack
Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
Dust FiltersBottom / Top
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays2
Expansion Slots7
Fan OptionsBottom - 2 x 120mm / Front - 3 x 120mm / Front - 3 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm / Top - 4 x 120mm
Max GPU Length410 mm
Max CPU Cooler Height165 mm
Max PSU Length230 mm
Dimensions18.98" x 8,5" x 19.53"
配送重量9.96 kg
梱包サイズ552 × 533 × 277 mm

このモデルの他のバージョン

同シリーズにさらに 1点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How loud are the pre-installed 140mm and 120mm ARGB fans when the system runs all day?

The case ships with three 140mm front and one 120mm rear ARGB fans; noise levels depend on the fan curves you set in BIOS or software, but the large 140mm units can move ample air at lower RPMs, helping keep acoustic output modest under sustained loads.

What motherboard form factors and power-supply length does the case accept so I know my current parts will fit?

The chassis supports ATX, E-ATX, Micro-ATX and Mini-ITX boards and accommodates power supplies up to 230mm long, so most standard ATX PSUs will install without interference.

Will my existing 3.5-inch hard drives and 2.5-inch SSDs mount inside without extra brackets?

Yes — the case provides two internal 3.5-inch bays and two internal 2.5-inch bays, allowing you to reinstall your current drives directly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。