OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
MSI
Mid-tower case supports ATX and E-ATX boards, fits 360 mm radiators, and includes four 120 mm ARGB fans
The MPG GUNGNIR 211R AIRFLOW PZ is a black mid-tower chassis built from SPCC steel with a tempered glass side panel. It fits ATX, E-ATX, Micro-ATX and ITX motherboards and comes with four pre-installed 120 mm PWM ARGB fans for immediate airflow. The geometric front panel and LED button let you customise lighting without extra software.
Four fans and a back-connect layout are already mounted, so the main work is routing cables behind the motherboard tray and securing drives in the two 3.5-inch or six 2.5-inch bays. The tempered glass panel swings open on hinges, but alignment can be tight if cables press against the edge. Radiator brackets support 120, 140, 240, 280 and 360 mm units at front and top, yet the front mounting points sit close to the drive cages, so long radiators may limit drive space.
Confirm your graphics card is no longer than 360 mm and your CPU cooler stays under 175 mm in height. The power supply must fit within 220 mm depth, and the seven expansion slots cover standard double-slot cards only. Front and top radiator clearance shares the same volume, so a 360 mm unit in one location blocks the other. Builders needing more than two 3.5-inch drives or a thicker radiator stack should verify internal layout first.
| Brand | MSI |
|---|---|
| Model | MPG GUNGNIR 211R AIRFLOW PZ |
| Type | ATX Mid Tower |
| Color | Black |
| Case Material | SPCC Steel / Tempered Glass |
| Motherboard Compatibility | ATX / E-ATX / ITX / Micro ATX |
| Side Panel | 1 x Side Tempered Glass Panel |
| Internal 3.5" Drive Bays | 2 |
| Internal 2.5" Drive Bays | 6 |
| Expansion Slots | 7 |
| Fan Options | Front - 3 x 120mm / Rear - 1 x 120mm / Top - 3 x 120mm |
| Pre-installed Fans | Front - 3 x 120mm / Rear - 1 x 120mm |
| Radiator Options | Top: 120 / 140 / 240 / 280 / 360 mm Front: 120 / 140 / 240 / 280 / 360 mm Rear: 120 / 140 mm |
| Max GPU Length | 360 mm |
| Max CPU Cooler Height | 175 mm |
| Max PSU Length | 220 mm |
| وزن الشحنة | 9.84 kg |
| أبعاد الطرد | 564 × 546 × 305 mm |
Press the MSI LED button on the I/O panel; the four 120 mm ARGB fans should light immediately and you will hear them spin up when the system posts.
The case includes the SPCC steel chassis, one tempered glass side panel, four pre-installed 120 mm ARGB fans and mounting hardware; you still need a motherboard, CPU cooler, graphics card, power supply and storage drives.
Both the front and top support 120, 140, 240, 280 and 360 mm radiators, so a 360 mm unit can be mounted in either location.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟