نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Compact storage box holding 48-piece nozzle cleaning kit with stainless steel needles, copper brushes, tweezers and Allen wrenches

MUNUOSIKEJI MNS-048-126 48-Piece 3D Printer Nozzle Cleaning Kit

SKU CH-5DWZ-2NFJQ

A 48-piece maintenance kit with 38 stainless steel needles in eight sizes from 0.15 to 0.8 mm, copper brushes, tweezers and Allen wrenches in a storage box

  • TypeMNS-048-126
  • Clears any nozzle with 8 needle sizes from .15 to .8mm
  • 38 stainless needles plus tweezers, brushes and wrenches in one case
  • Flexible steel needles bend 360 degrees without breaking inside hotend
  • Soft copper brushes clean hotend exterior without scratching nozzle surface
  • Fits Creality Ender 3, Anycubic, Elegoo, Sovol and most FDM printers

48-Piece Nozzle Cleaning Kit

The MUNUOSIKEJI MNS-048-126 kit supplies 48 tools for clearing FDM printer nozzles. It contains 38 stainless steel needles across eight diameters from 0.15mm to 0.8mm, plus two copper brushes, two precision tweezers and seven wrenches. The set targets hobbyists and workshop operators who want a single box for routine hotend maintenance and sudden blockages.

Thermals Noise and Power

This accessory has no moving parts, draws no electricity and produces no heat or sound during use. The flexible stainless steel needles bend to 360-degree angles inside the nozzle chamber without snapping. Soft copper bristles remove external residue without scratching the nozzle surface.

Upgrade From Basic Needle Sets

The kit replaces single-size needle packs that only fit one nozzle diameter. Buyers who print with multiple orifice sizes gain the full 0.15mm to 0.8mm range in one purchase. It is not for users who need filament-specific chemical solvents or automated cleaning stations.

أبرز المميزات

  • Clears any nozzle with 8 needle sizes from .15 to .8mm
  • 38 stainless needles plus tweezers, brushes and wrenches in one case
  • Flexible steel needles bend 360 degrees without breaking inside hotend
  • Soft copper brushes clean hotend exterior without scratching nozzle surface
  • Fits Creality Ender 3, Anycubic, Elegoo, Sovol and most FDM printers

المواصفات

BrandMUNUOSIKEJI
ModelMNS-048-126
Part NumberMNS-048-126
TypeMNS-048-126

أسئلة حول هذا المنتج

How do I use the 0.15 mm to 0.8 mm stainless steel needles without snapping them inside the hotend?

Heat the nozzle to printing temperature, select the needle matching your nozzle bore, and insert it gently with a slight twist; the flexible steel bends up to 360 degrees so you can clear the chamber without forcing the tip.

Which parts of the MNS-048-126 kit will wear out and need replacing first?

The copper brushes and the 38 stainless steel needles are consumables; brushes lose bristle stiffness and needles can deform after repeated heavy use, while the tweezers, Allen wrenches and storage box remain serviceable.

What is the first limitation I will hit when cleaning multiple nozzles back-to-back?

Needle diameter range stops at 0.8 mm, so any nozzle larger than that cannot be cleared with this kit; also, copper brushes soften with heat, reducing scrubbing effectiveness during extended sessions.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.