نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black AT dual PSU adapter cable with 24-pin 20+4 main and two secondary connectors, 85cm length

myVolts

myVolts Dual PSU Adapter 24Pin 20+4 85cm 2000W Practical Desktop PC

SKU CH-N914-J186P

Connects two or three PSUs to one motherboard via 24-pin 20+4 cables, delivering up to 2000 W through an 85 cm compact adapter

  • TypeAT
  • Combines two power supplies for higher output without hardware upgrades
  • 20+4 pin main connector fits both 24-pin and 20-pin motherboards
  • Supports up to three PSUs on a single motherboard
  • 85 cm cable length keeps routing tidy inside the case
  • Rated for systems drawing up to 2000 W

Dual PSU adapter for 20+4 pin motherboards

This myVolts adapter joins two power supplies to one motherboard using a 24-pin female main connector and two 24-pin female secondary connectors. The 20+4 pin design fits both 24-pin and 20-pin ATX headers. An 85 cm cable length gives routing flexibility inside full-size cases. It is rated for combined loads up to 2000 W.

Desktop builders expanding GPU power without

Users who need extra wattage for a high-end graphics card can add a second unit instead of buying a larger single supply. The adapter also supports a third PSU for extreme multi-GPU setups. It does not create additional PCIe or EPS leads, so each power supply must still provide the cables its components require. Laptops, small-form-factor systems and any board lacking a standard 24-pin ATX socket cannot use this cable.

2000 W combined rating and 85 cm reach

The single figure that decides fit is the 2000 W maximum for the linked supplies; exceeding it risks overload. The 85 cm length must span the gap between both PSUs and the motherboard socket in your chassis.

أبرز المميزات

  • Combines two power supplies for higher output without hardware upgrades
  • 20+4 pin main connector fits both 24-pin and 20-pin motherboards
  • Supports up to three PSUs on a single motherboard
  • 85 cm cable length keeps routing tidy inside the case
  • Rated for systems drawing up to 2000 W

المواصفات

TypeAT

أسئلة حول هذا المنتج

How can I verify the dual PSU adapter is working correctly after connecting two power supplies?

The motherboard should power on normally and the graphics card should run at full frequency without throttling, which the adapter is designed to prevent.

What does the package contain and do I need any extra cables to use the adapter?

The box includes one 85 cm power cable with a 24-pin female (20+4) main connector and two 24-pin female secondary connectors; no additional cables are required.

Which version of the adapter should I choose for a system that may draw up to 2000 W?

The supplied adapter supports large power supplies within 2000 W and fits both 24-pin and 20-pin motherboard headers via its 20+4 design.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.