暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

myVolts

myVolts Dual PSU Adapter 24Pin 20+4 85cm 2000W Practical Desktop PC

SKU CH-N914-J186P

Connects two or three PSUs to one motherboard via 24-pin 20+4 cables, delivering up to 2000 W through an 85 cm compact adapter

  • TypeAT
  • Combines two power supplies for higher output without hardware upgrades
  • 20+4 pin main connector fits both 24-pin and 20-pin motherboards
  • Supports up to three PSUs on a single motherboard
  • 85 cm cable length keeps routing tidy inside the case
  • Rated for systems drawing up to 2000 W

Dual PSU adapter for 20+4 pin motherboards

This myVolts adapter joins two power supplies to one motherboard using a 24-pin female main connector and two 24-pin female secondary connectors. The 20+4 pin design fits both 24-pin and 20-pin ATX headers. An 85 cm cable length gives routing flexibility inside full-size cases. It is rated for combined loads up to 2000 W.

Desktop builders expanding GPU power without

Users who need extra wattage for a high-end graphics card can add a second unit instead of buying a larger single supply. The adapter also supports a third PSU for extreme multi-GPU setups. It does not create additional PCIe or EPS leads, so each power supply must still provide the cables its components require. Laptops, small-form-factor systems and any board lacking a standard 24-pin ATX socket cannot use this cable.

2000 W combined rating and 85 cm reach

The single figure that decides fit is the 2000 W maximum for the linked supplies; exceeding it risks overload. The 85 cm length must span the gap between both PSUs and the motherboard socket in your chassis.

特長

  • Combines two power supplies for higher output without hardware upgrades
  • 20+4 pin main connector fits both 24-pin and 20-pin motherboards
  • Supports up to three PSUs on a single motherboard
  • 85 cm cable length keeps routing tidy inside the case
  • Rated for systems drawing up to 2000 W

仕様

TypeAT

この商品に関する質問

How can I verify the dual PSU adapter is working correctly after connecting two power supplies?

The motherboard should power on normally and the graphics card should run at full frequency without throttling, which the adapter is designed to prevent.

What does the package contain and do I need any extra cables to use the adapter?

The box includes one 85 cm power cable with a 24-pin female (20+4) main connector and two 24-pin female secondary connectors; no additional cables are required.

Which version of the adapter should I choose for a system that may draw up to 2000 W?

The supplied adapter supports large power supplies within 2000 W and fits both 24-pin and 20-pin motherboard headers via its 20+4 design.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。