نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular metal power supply unit with ventilated sides and terminal block connectors

myVolts

myVolts HRPG-150-15 150W AT Power Supply

SKU CH-Z4TB-WY1KR

Enclosed 150 W AT power supply with active PFC, 88 % efficiency and full protection suite

  • TypeAT
  • High-efficiency design reduces energy waste with up to 88% conversion
  • Active PFC maintains power factor above .95 for cleaner grid draw
  • Surge tolerance handles 300 VAC for five seconds without damage
  • Multiple protections guard against short circuit overload over-voltage and over-temperature
  • Ultra-low standby draw stays below .5 W when idle

150 W AT Power Supply for Industrial Use

The myVolts HRPG-150-15 is a 150 W single-output AT power supply delivering 15 V at 10 A. It features active PFC with a power factor above .95 and up to 88 % efficiency. Cooling is handled by free air convection in a 38 mm low-profile enclosure. Built-in protections cover short circuit, overload, over voltage and over temperature.

Check Input Voltage and Mounting Space

Verify that your installation can accept universal AC input across the full range and withstand 300 VAC surge for 5 seconds. Ensure the 38 mm profile fits your enclosure and that free air convection provides adequate airflow. Confirm the load requires a constant 15 V output with current limiting. The unit includes remote ON-OFF control and remote sense functions for system integration.

Replaces Older 150 W Units Without PFC

This supply upgrades from legacy 150 W units lacking active PFC or modern protection suites. The jump is worthwhile when you need PF>.95, no-load consumption below .5 W and constant current limiting for LED lighting or similar loads. It is not for builds requiring multiple output voltages, higher wattage than 150 W or forced-air cooling.

أبرز المميزات

  • High-efficiency design reduces energy waste with up to 88% conversion
  • Active PFC maintains power factor above .95 for cleaner grid draw
  • Surge tolerance handles 300 VAC for five seconds without damage
  • Multiple protections guard against short circuit overload over-voltage and over-temperature
  • Ultra-low standby draw stays below .5 W when idle

المواصفات

TypeAT

أسئلة حول هذا المنتج

Does the HRPG-150-15 include cables or mounting hardware, or must they be purchased separately?

The unit is an enclosed power supply with screw terminals for AC input and DC output; cables, connectors and mounting brackets are not included and must be sourced separately.

Which output voltage and current rating should I select for a 15 V load?

Choose the HRPG-150-15 variant, which delivers 15 V at 10 A for a total of 150 W.

What does the 150 W rating mean for continuous operation in a ventilated enclosure?

The supply can deliver up to 150 W continuously with up to 88 % efficiency, cooled by free-air convection, and includes over-temperature protection.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.