暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular metal power supply unit with ventilated sides and terminal block connectors

myVolts

myVolts HRPG-150-15 150W AT Power Supply

SKU CH-Z4TB-WY1KR

Enclosed 150 W AT power supply with active PFC, 88 % efficiency and full protection suite

  • TypeAT
  • High-efficiency design reduces energy waste with up to 88% conversion
  • Active PFC maintains power factor above .95 for cleaner grid draw
  • Surge tolerance handles 300 VAC for five seconds without damage
  • Multiple protections guard against short circuit overload over-voltage and over-temperature
  • Ultra-low standby draw stays below .5 W when idle

150 W AT Power Supply for Industrial Use

The myVolts HRPG-150-15 is a 150 W single-output AT power supply delivering 15 V at 10 A. It features active PFC with a power factor above .95 and up to 88 % efficiency. Cooling is handled by free air convection in a 38 mm low-profile enclosure. Built-in protections cover short circuit, overload, over voltage and over temperature.

Check Input Voltage and Mounting Space

Verify that your installation can accept universal AC input across the full range and withstand 300 VAC surge for 5 seconds. Ensure the 38 mm profile fits your enclosure and that free air convection provides adequate airflow. Confirm the load requires a constant 15 V output with current limiting. The unit includes remote ON-OFF control and remote sense functions for system integration.

Replaces Older 150 W Units Without PFC

This supply upgrades from legacy 150 W units lacking active PFC or modern protection suites. The jump is worthwhile when you need PF>.95, no-load consumption below .5 W and constant current limiting for LED lighting or similar loads. It is not for builds requiring multiple output voltages, higher wattage than 150 W or forced-air cooling.

特長

  • High-efficiency design reduces energy waste with up to 88% conversion
  • Active PFC maintains power factor above .95 for cleaner grid draw
  • Surge tolerance handles 300 VAC for five seconds without damage
  • Multiple protections guard against short circuit overload over-voltage and over-temperature
  • Ultra-low standby draw stays below .5 W when idle

仕様

TypeAT

この商品に関する質問

Does the HRPG-150-15 include cables or mounting hardware, or must they be purchased separately?

The unit is an enclosed power supply with screw terminals for AC input and DC output; cables, connectors and mounting brackets are not included and must be sourced separately.

Which output voltage and current rating should I select for a 15 V load?

Choose the HRPG-150-15 variant, which delivers 15 V at 10 A for a total of 150 W.

What does the 150 W rating mean for continuous operation in a ventilated enclosure?

The supply can deliver up to 150 W continuously with up to 88 % efficiency, cooled by free-air convection, and includes over-temperature protection.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。