myVolts
myVolts HRPG-150-24 150W 24V 6.5A Power Supply
Delivers 24 V at 6.5 A with active PFC above 0.95, 88 % efficiency, full protection suite and convection cooling in a 38 mm low-profile enclosure
- TypeAT
- High efficiency up to 88% reduces energy waste
- Active PFC with PF>0.95 improves power quality
- Withstands 300VAC surge input for 5 seconds
- Multiple protections guard against short circuit and overload
- No-load power consumption under .5W saves standby energy
150 W 24 V Enclosed Power Supply
The myVolts HRPG-150-24 is a 150 W single-output unit delivering 24 V at 6.5 A. It accepts a universal AC input range and includes active PFC with a power factor above 0.95. The enclosure measures 38 mm in height for 1U low-profile mounting. Cooling is handled by free air convection with no internal fan.
Industrial and LED Lighting Installations
This supply suits engineers who need a compact 24 V source for LED lighting arrays, automation panels or test bench equipment. It also fits 1U rack builds where convection cooling is preferred. Buyers who require multiple voltage rails, higher current at 24 V or forced-air cooling for dense enclosures should consider other form factors.
Screw-Terminal Wiring and Convection Clearance
Installation uses screw terminals for both AC input and DC output; no specialised connectors are required. The built-in remote on-off and remote sense functions simplify system integration. The most common issue is insufficient airflow around the 38 mm case, which triggers over-temperature protection under sustained full load. Ensure the mounting orientation allows unrestricted convection paths.
أبرز المميزات
- High efficiency up to 88% reduces energy waste
- Active PFC with PF>0.95 improves power quality
- Withstands 300VAC surge input for 5 seconds
- Multiple protections guard against short circuit and overload
- No-load power consumption under .5W saves standby energy
المواصفات
| Type | AT |
|---|
أسئلة حول هذا المنتج
What AC voltage range does the HRPG-150-24 accept for the mains connection?
The unit accepts universal AC input across the full range without a selector switch.
Can I use the built-in remote ON-OFF control with a simple switch or logic signal?
Yes, the supply includes a built-in remote ON-OFF control that can be driven by an external switch or logic level.
How can I verify the power supply is regulating correctly after wiring it up?
Measure the output with a multimeter; it should read 24 V at up to 6.5 A load, and the built-in remote sense function helps maintain that voltage at the load.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



