نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular aluminium power supply with screw terminals and voltage adjuster

myVolts

myVolts S-120-12 12V 10A 120W Power Supply

SKU CH-X4VB-9TCH0

A 12 V 10 A 120 W switch-mode supply with short-circuit, overload and over-voltage protection, aluminium-alloy case and CCC, FCC and CE compliance for industrial automation, LED displays, CCTV.

  • TypeAT
  • Delivers 120 W continuous power for demanding 12 V loads
  • Wide AC 100–240 V input suits global mains supplies
  • Built-in short-circuit, overload and over-voltage protection safeguards connected gear
  • Aluminium-alloy chassis runs 0–40 °C with natural convection cooling
  • Certified to CCC, FCC and CE safety standards

12 V 10 A industrial power supply

This myVolts unit delivers a regulated 12 V DC output at up to 10 A for 120 W continuous power. It accepts a universal AC input range of 100 to 240 V, making it suitable for bench use, LED installations, CCTV systems, 3D printers and similar industrial automation tasks.

120 W capacity with protection limits

The supply handles loads up to its 120 W rating with built-in overload, overvoltage and short-circuit protection that shut down the output before damage occurs. It operates reliably between 0 and 40 °C ambient; above that temperature headroom drops and sustained full-load operation is not guaranteed.

AT form-factor switch-mode design

The aluminium-alloy chassis uses natural convection cooling with no fan, so silent operation is assured in noise-sensitive environments. Terminal blocks provide L and N for AC input, GND and V for DC output, plus an ADJ trimmer for fine voltage adjustment. Safety approvals include CCC, FCC and CE.

أبرز المميزات

  • Delivers 120 W continuous power for demanding 12 V loads
  • Wide AC 100–240 V input suits global mains supplies
  • Built-in short-circuit, overload and over-voltage protection safeguards connected gear
  • Aluminium-alloy chassis runs 0–40 °C with natural convection cooling
  • Certified to CCC, FCC and CE safety standards

المواصفات

TypeAT

أسئلة حول هذا المنتج

Will the myVolts S-120-12 12V 10A 120W Power Supply run safely with older LED strips that only draw a few amps?

The unit delivers up to 10 A at 12 V and includes short-circuit, overload and overvoltage protection, so it will safely supply only the current your legacy strips actually draw.

How can I confirm the myVolts S-120-12 12V 10A 120W Power Supply is operating correctly once wired?

Measure the DC output at the V and GND terminals; it should read 12 V with low ripple, and the built-in ADJ trimmer lets you fine-tune the voltage if needed.

What comes in the box with the myVolts S-120-12 12V 10A 120W Power Supply and what must I source separately?

The supply itself is included; you must provide an AC mains cord for the L and N inputs and your own DC wiring for the V and GND outputs.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.