نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

myVolts

myVolts S-240-24 24V 10A 240W pink power supply

SKU CH-63Q4-JGDN5

A 240 W aluminium-cased switch-mode unit delivering 24 V at 10 A with short-circuit, overload and over-voltage protection, CCC, FCC and CE compliance, and 100 % full-load burn-in testing

  • TypeAT
  • High efficiency with low DC ripple for stable output
  • Operates at low temperatures for extended service life
  • circuit, overload and overvoltage protection built in
  • 100% full-load burn-in test ensures reliable operation
  • High insulation strength for safe industrial use

240W 24V pink power supply

This aluminium alloy switch-mode unit delivers 240 watts at 24 volts with a 10 amp output. It accepts AC input from 110 to 220 volts with a fifteen percent tolerance. The supply is built for industrial automation, LED displays, CCTV, radio, computer engineering, LED light bars and 3D printers.

Sustained load behaviour

The driver is rated for continuous operation at one hundred percent load after a full burn-in test. Protection circuits guard against short circuit, overload and overvoltage conditions. High working efficiency and low DC ripple keep output stable during extended use. The unit operates in ambient temperatures from zero to forty degrees Celsius.

Thermals, noise and power

Natural convection cooling eliminates fan noise entirely. The aluminium alloy chassis acts as a heatsink while maintaining excellent insulation strength. Storage temperature range spans minus twenty to sixty degrees Celsius. Humidity tolerance reaches ninety-five percent non-condensing.

أبرز المميزات

  • High efficiency with low DC ripple for stable output
  • Operates at low temperatures for extended service life
  • circuit, overload and overvoltage protection built in
  • 100% full-load burn-in test ensures reliable operation
  • High insulation strength for safe industrial use

المواصفات

TypeAT

أسئلة حول هذا المنتج

How much heat and noise does the S-240-24 produce when running at 240 W all day?

It uses natural convection cooling with no fan, so it runs silently. The aluminium alloy case dissipates heat while the unit stays within the 0–40 °C working temperature range.

What must I already have to wire this supply into my project?

You need an AC mains cable for the L and N terminals and your load wiring for the V+ and GND terminals. A small screwdriver is required for the screw terminals.

Will the S-240-24 safely power older 24 V gear that draws well under 10 A?

Yes. The output is a steady 24 V DC with overload, over-voltage and short-circuit protection, so legacy devices drawing less than the 10 A rating are protected.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.