نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular pink aluminium power supply, terminal screws visible

myVolts

myVolts S-600-24 24V 25A 600W pink power supply

SKU CH-8NN6-ADC6Q

A 600 W industrial switch-mode unit delivering 24 V at 25 A with overload, over-voltage and short-circuit protection

  • TypeAT
  • High efficiency and low DC ripple for stable operation
  • Built-in short-circuit, overload and overvoltage protection
  • Tested at 100% total load before shipment
  • Operates from 0 to 40°C with long service life
  • Adjustable 24V output up to 25A delivering 600W

Industrial 24V 600W supply

The myVolts S-600-24 is a 24V 25A 600W switch-mode power supply built into an aluminium alloy enclosure. It accepts AC 110V or 220V input with a ±15% tolerance and delivers a regulated DC output adjustable via the +V/ADJ terminal. The unit carries CCC, FCC and CE safety compliance and is designed for continuous industrial use.

Suited for fixed 24V loads.

Engineers running LED displays, CCTV systems, 3D printers or radio equipment will find the 600W capacity and built-in short-circuit, overload and overvoltage protection a direct match. The design lacks hot-swap or N+1 redundancy features, so builders who need uninterrupted failover or battery-backed operation should look at other topologies.

600W continuous with thermal headroom to 40°C

At full 25A load the supply runs within its 0–40°C working temperature range and has passed a 100% burn-in test. Low DC ripple and high insulation strength keep sensitive electronics stable. Above 40°C ambient or when the load exceeds 25A the protection circuits will trip, so the installer must ensure adequate airflow and stay within the rated envelope.

أبرز المميزات

  • High efficiency and low DC ripple for stable operation
  • Built-in short-circuit, overload and overvoltage protection
  • Tested at 100% total load before shipment
  • Operates from 0 to 40°C with long service life
  • Adjustable 24V output up to 25A delivering 600W

المواصفات

TypeAT

أسئلة حول هذا المنتج

What AC supply do I need to run this 600 W unit?

It accepts AC 110 V or 220 V with a ±15 % tolerance, so standard mains in most regions will work without an extra transformer.

Will the aluminium-alloy case fit alongside legacy gear in my rack?

The enclosure is made of aluminium alloy and relies on natural convection cooling, so it needs free airflow but adds no fan noise to older equipment.

How do I verify the output is correct after wiring it up?

Use the +V/ADJ terminal to trim the DC voltage and confirm 24 V at the V and GND terminals with a multimeter under load.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.