暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Rectangular pink aluminium power supply, terminal screws visible

myVolts

myVolts S-600-24 24V 25A 600W pink power supply

SKU CH-8NN6-ADC6Q

A 600 W industrial switch-mode unit delivering 24 V at 25 A with overload, over-voltage and short-circuit protection

  • TypeAT
  • High efficiency and low DC ripple for stable operation
  • Built-in short-circuit, overload and overvoltage protection
  • Tested at 100% total load before shipment
  • Operates from 0 to 40°C with long service life
  • Adjustable 24V output up to 25A delivering 600W

Industrial 24V 600W supply

The myVolts S-600-24 is a 24V 25A 600W switch-mode power supply built into an aluminium alloy enclosure. It accepts AC 110V or 220V input with a ±15% tolerance and delivers a regulated DC output adjustable via the +V/ADJ terminal. The unit carries CCC, FCC and CE safety compliance and is designed for continuous industrial use.

Suited for fixed 24V loads.

Engineers running LED displays, CCTV systems, 3D printers or radio equipment will find the 600W capacity and built-in short-circuit, overload and overvoltage protection a direct match. The design lacks hot-swap or N+1 redundancy features, so builders who need uninterrupted failover or battery-backed operation should look at other topologies.

600W continuous with thermal headroom to 40°C

At full 25A load the supply runs within its 0–40°C working temperature range and has passed a 100% burn-in test. Low DC ripple and high insulation strength keep sensitive electronics stable. Above 40°C ambient or when the load exceeds 25A the protection circuits will trip, so the installer must ensure adequate airflow and stay within the rated envelope.

特長

  • High efficiency and low DC ripple for stable operation
  • Built-in short-circuit, overload and overvoltage protection
  • Tested at 100% total load before shipment
  • Operates from 0 to 40°C with long service life
  • Adjustable 24V output up to 25A delivering 600W

仕様

TypeAT

この商品に関する質問

What AC supply do I need to run this 600 W unit?

It accepts AC 110 V or 220 V with a ±15 % tolerance, so standard mains in most regions will work without an extra transformer.

Will the aluminium-alloy case fit alongside legacy gear in my rack?

The enclosure is made of aluminium alloy and relies on natural convection cooling, so it needs free airflow but adds no fan noise to older equipment.

How do I verify the output is correct after wiring it up?

Use the +V/ADJ terminal to trim the DC voltage and confirm 24 V at the V and GND terminals with a multimeter under load.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。