NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 UDIMM memory upgrade for Thinkmate VSX-R5
16 GB DDR4-3200 dual-channel kit with CL22 timing and 1.2 V operation for Thinkmate VSX-R5 workstations
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB kit (2×8 GB) doubles workstation capacity
- DDR4 3200 MT/s (PC4-25600) matches Thinkmate VSX-R5 spec
- CL22 latency at 1.20 V keeps power draw low
- 288-pin UDIMM, non-ECC, unbuffered fits factory slots
- Major-brand Samsung, Micron or Hynix chips ensure stability
Thinkmate VSX-R5 Compatible Memory Kit
This 16 GB kit contains two 8 GB DDR4 UDIMM modules built for Thinkmate VSX-R5 workstations. It targets administrators and technicians who need a straightforward capacity increase without changing the platform. The modules are validated for the listed VSX-R5 variants and install in standard 288-pin slots.
Standard Voltage Low-Profile Operation
Each module runs at 1.20 V with CL22 timings at 3200 MT/s, matching the JEDEC DDR4 baseline for unbuffered memory. No heat spreader is fitted, so airflow from existing chassis fans passes directly over the DRAM. Power draw stays within normal DDR4 limits for this density and speed.
Dual-Channel Upgrade Path
The 2 x 8 GB configuration populates a pair of slots for dual-channel bandwidth while leaving remaining DIMM positions free for future expansion. No buffered or ECC circuitry is present, so the kit suits non-ECC consumer and workstation boards that accept unbuffered UDIMMs. Verify the motherboard manual for maximum supported capacity per slot.
أبرز المميزات
- 16 GB kit (2×8 GB) doubles workstation capacity
- DDR4 3200 MT/s (PC4-25600) matches Thinkmate VSX-R5 spec
- CL22 latency at 1.20 V keeps power draw low
- 288-pin UDIMM, non-ECC, unbuffered fits factory slots
- Major-brand Samsung, Micron or Hynix chips ensure stability
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
أسئلة حول هذا المنتج
How do I install the 288-pin DDR4 UDIMM modules in a Thinkmate VSX-R5 workstation, and what step is commonly missed?
Power off the system, open the chassis, align each module's notch with the slot key, press firmly until both side clips click, then verify the full 16GB appears in BIOS — the step often missed is seating both ends evenly so the clips engage.
What maintenance or replacement will this 16GB DDR4 3200 kit need over time?
No scheduled maintenance is required; keep interior dust-free for airflow. Replacement is only needed if a module fails — the lifetime replacement warranty covers that event.
What limit appears first when the 1.2V CL22 memory runs sustained workloads?
The CL22 latency at 3200 MT/s sets the throughput ceiling; thermals stay modest at 1.2V without a heat spreader, so latency-bound performance is the first bottleneck.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.



