我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 UDIMM memory upgrade for Thinkmate VSX-R5

SKU CH-GAYG-76F2C

16 GB DDR4-3200 dual-channel kit with CL22 timing and 1.2 V operation for Thinkmate VSX-R5 workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit (2×8 GB) doubles workstation capacity
  • DDR4 3200 MT/s (PC4-25600) matches Thinkmate VSX-R5 spec
  • CL22 latency at 1.20 V keeps power draw low
  • 288-pin UDIMM, non-ECC, unbuffered fits factory slots
  • Major-brand Samsung, Micron or Hynix chips ensure stability

Thinkmate VSX-R5 Compatible Memory Kit

This 16 GB kit contains two 8 GB DDR4 UDIMM modules built for Thinkmate VSX-R5 workstations. It targets administrators and technicians who need a straightforward capacity increase without changing the platform. The modules are validated for the listed VSX-R5 variants and install in standard 288-pin slots.

Standard Voltage Low-Profile Operation

Each module runs at 1.20 V with CL22 timings at 3200 MT/s, matching the JEDEC DDR4 baseline for unbuffered memory. No heat spreader is fitted, so airflow from existing chassis fans passes directly over the DRAM. Power draw stays within normal DDR4 limits for this density and speed.

Dual-Channel Upgrade Path

The 2 x 8 GB configuration populates a pair of slots for dual-channel bandwidth while leaving remaining DIMM positions free for future expansion. No buffered or ECC circuitry is present, so the kit suits non-ECC consumer and workstation boards that accept unbuffered UDIMMs. Verify the motherboard manual for maximum supported capacity per slot.

商品特色

  • 16 GB kit (2×8 GB) doubles workstation capacity
  • DDR4 3200 MT/s (PC4-25600) matches Thinkmate VSX-R5 spec
  • CL22 latency at 1.20 V keeps power draw low
  • 288-pin UDIMM, non-ECC, unbuffered fits factory slots
  • Major-brand Samsung, Micron or Hynix chips ensure stability

商品規格

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

商品問答

How do I install the 288-pin DDR4 UDIMM modules in a Thinkmate VSX-R5 workstation, and what step is commonly missed?

Power off the system, open the chassis, align each module's notch with the slot key, press firmly until both side clips click, then verify the full 16GB appears in BIOS — the step often missed is seating both ends evenly so the clips engage.

What maintenance or replacement will this 16GB DDR4 3200 kit need over time?

No scheduled maintenance is required; keep interior dust-free for airflow. Replacement is only needed if a module fails — the lifetime replacement warranty covers that event.

What limit appears first when the 1.2V CL22 memory runs sustained workloads?

The CL22 latency at 3200 MT/s sets the throughput ceiling; thermals stay modest at 1.2V without a heat spreader, so latency-bound performance is the first bottleneck.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。