BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
16 GB DDR4 2666 CL19 1.2 V 288-pin UDIMM upgrades desktop memory capacity and speed
This 16GB DDR4 UDIMM runs at 2666 MT/s with CL19 latency and 1.20 V operation. It uses a 288-pin unbuffered non-ECC design built with major OEM chips from Samsung Micron or Hynix. The module targets desktop PC upgrades and standard workloads. No heat spreader or LED lighting is included.
The stick installs in any desktop board that accepts 288-pin DDR4 UDIMM memory at 1.20 V. It requires no extra power cables or cooling hardware and leaves all expansion slots free. Compatibility is validated through stress testing under load. The single 16GB rank lets you populate remaining slots later.
Home office users and IT professionals seeking reliable capacity for productivity tasks will find this module a direct fit. Enthusiasts chasing higher frequencies lower latencies or RGB aesthetics should evaluate other kits. ECC or registered server platforms are not supported by this unbuffered non-ECC design.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD21300-628K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
The module is a standard 288-pin DDR4 UDIMM. It fits any desktop board with a DDR4 UDIMM slot that supports 2666 MT/s at 1.20 V.
The module runs at JEDEC 2666 MT/s CL19 1.20 V by default. No XMP or manual timing entry is needed unless the board forces a lower speed.
Yes. Match the DDR4 2666 MT/s 1.20 V spec. The board will run both in single-channel or flex-mode depending on slot population.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟