نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 1.2V 288-Pin UDIMM Supermicro MEM-DR416LD-UN26

SKU CH-XA5Q-R6PNE

16 GB DDR4 UDIMM running at 2666 MT/s with CL19 latency and 1.20 V operation

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity expands desktop multitasking headroom
  • DDR4 2666 speed delivers PC4-21300 bandwidth
  • CL19 latency at 1.20 V keeps power draw low
  • 288-pin UDIMM fits standard non-ECC motherboard slots
  • Major OEM Samsung, Micron, Hynix chips ensure validated compatibility

16 GB DDR4 UDIMM for Desktop Upgrades

This NEMIX RAM module provides 16 GB of DDR4 memory in a single 288-pin UDIMM. It runs at 2666 MT/s with a CAS latency of 19 and operates at 1.20 V. The stick is non-ECC and unbuffered, making it suitable for standard desktop motherboards that accept PC4-21300 memory.

Check Motherboard DDR4 Slot and Speed Support

Verify that your motherboard has a free 288-pin DDR4 DIMM slot and supports 2666 MT/s operation at 1.20 V. Confirm the board accepts non-ECC unbuffered UDIMMs and can run at CL19 timings. Consult the motherboard manual for maximum capacity per slot and populated-channel rules before ordering.

Fits Standard Desktop Builds Without a Heat Spreader

The module installs directly into any compatible 288-pin DDR4 slot and requires no additional power connectors. Its low-profile design without a heat spreader clears most CPU coolers and leaves adjacent slots accessible. It frees up capacity headroom for future expansion while delivering the specified 2666 MT/s throughput.

أبرز المميزات

  • 16 GB capacity expands desktop multitasking headroom
  • DDR4 2666 speed delivers PC4-21300 bandwidth
  • CL19 latency at 1.20 V keeps power draw low
  • 288-pin UDIMM fits standard non-ECC motherboard slots
  • Major OEM Samsung, Micron, Hynix chips ensure validated compatibility

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD21300-628K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

أسئلة حول هذا المنتج

Will this module work in a motherboard that only supports DDR4 2666 speeds?

Yes, the module runs at DDR4 2666 (PC4-21300) with CL19 latency and 1.20V, matching that speed exactly.

Does the 2Rx8 organization require a specific CPU or chipset to function?

Standard desktop platforms that accept non-ECC unbuffered UDIMMs will recognize the 2Rx8 layout without special CPU support.

Is a heat spreader needed for stable operation at the rated 1.20V?

The module ships without a heat spreader and is validated at 1.20V; typical case airflow is sufficient for standard workloads.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.