暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 1.2V 288-Pin UDIMM Supermicro MEM-DR416LD-UN26

SKU CH-XA5Q-R6PNE

16 GB DDR4 UDIMM running at 2666 MT/s with CL19 latency and 1.20 V operation

  • Capacity16GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.20V
  • ECCNo
  • 16 GB capacity expands desktop multitasking headroom
  • DDR4 2666 speed delivers PC4-21300 bandwidth
  • CL19 latency at 1.20 V keeps power draw low
  • 288-pin UDIMM fits standard non-ECC motherboard slots
  • Major OEM Samsung, Micron, Hynix chips ensure validated compatibility

16 GB DDR4 UDIMM for Desktop Upgrades

This NEMIX RAM module provides 16 GB of DDR4 memory in a single 288-pin UDIMM. It runs at 2666 MT/s with a CAS latency of 19 and operates at 1.20 V. The stick is non-ECC and unbuffered, making it suitable for standard desktop motherboards that accept PC4-21300 memory.

Check Motherboard DDR4 Slot and Speed Support

Verify that your motherboard has a free 288-pin DDR4 DIMM slot and supports 2666 MT/s operation at 1.20 V. Confirm the board accepts non-ECC unbuffered UDIMMs and can run at CL19 timings. Consult the motherboard manual for maximum capacity per slot and populated-channel rules before ordering.

Fits Standard Desktop Builds Without a Heat Spreader

The module installs directly into any compatible 288-pin DDR4 slot and requires no additional power connectors. Its low-profile design without a heat spreader clears most CPU coolers and leaves adjacent slots accessible. It frees up capacity headroom for future expansion while delivering the specified 2666 MT/s throughput.

特長

  • 16 GB capacity expands desktop multitasking headroom
  • DDR4 2666 speed delivers PC4-21300 bandwidth
  • CL19 latency at 1.20 V keeps power draw low
  • 288-pin UDIMM fits standard non-ECC motherboard slots
  • Major OEM Samsung, Micron, Hynix chips ensure validated compatibility

仕様

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD21300-628K1
Capacity16GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

この商品に関する質問

Will this module work in a motherboard that only supports DDR4 2666 speeds?

Yes, the module runs at DDR4 2666 (PC4-21300) with CL19 latency and 1.20V, matching that speed exactly.

Does the 2Rx8 organization require a specific CPU or chipset to function?

Standard desktop platforms that accept non-ECC unbuffered UDIMMs will recognize the 2Rx8 layout without special CPU support.

Is a heat spreader needed for stable operation at the rated 1.20V?

The module ships without a heat spreader and is validated at 1.20V; typical case airflow is sufficient for standard workloads.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。