BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00278842BTC
متوفر
NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-PIN SODIMM POSIFLEX EK-1552 memory upgrade
16 GB DDR4-3200 SODIMM module rated CL22 at 1.2 V for POSIFLEX EK-1552 kiosks
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 3200 MHz boosts POS terminal responsiveness
- CL22 latency at 1.2 V keeps power draw low
- 2Rx8 dual-rank layout maximises memory density
- 260-pin SODIMM fits POSIFLEX EK-1552 Mercury kiosks
- Major OEM chips stress-tested for mission-critical stability
POSIFLEX EK-1552 SODIMM upgrade
This NEMIX RAM module delivers 16GB of DDR4 memory at 3200MHz for the POSIFLEX EK-1552 Mercury Series kiosk. It operates at 1.2V with CL22 latency and a 2Rx8 organisation. The 260-pin SODIMM form factor fits the system's memory slot directly. No heat spreader is included on the module.
Kiosk operators needing a single 16GB stick
Technicians maintaining POSIFLEX Mercury Series kiosks can install this part to restore or expand system memory. Builders working on other platforms or requiring ECC error correction should look at a different module. Systems that need registered or buffered memory are not supported by this unbuffered design.
2Rx8 rank configuration for the EK-1552
The module uses a 2Rx8 layout that matches the kiosk's memory controller requirements. Verify the service manual specifies this rank structure before ordering. A mismatched rank can prevent the system from posting or recognising the full capacity.
أبرز المميزات
- 16 GB DDR4 3200 MHz boosts POS terminal responsiveness
- CL22 latency at 1.2 V keeps power draw low
- 2Rx8 dual-rank layout maximises memory density
- 260-pin SODIMM fits POSIFLEX EK-1552 Mercury kiosks
- Major OEM chips stress-tested for mission-critical stability
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
أسئلة حول هذا المنتج
Should I choose the 16 GB single module or look for a dual-channel kit?
The listing supplies one 16 GB SODIMM. If the POSIFLEX EK-1552 has two slots, adding a second identical module later will enable dual-channel bandwidth.
What does the 3200 MHz rating deliver inside the EK-1552 kiosk?
The module runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.2 V, giving the maximum JEDEC speed the platform’s memory controller supports.
Is the 260-pin SODIMM interface compatible with the POSIFLEX EK-1552?
Yes — the 260-pin DDR4 SODIMM form factor matches the slot used in the EK-1552 Mercury Series kiosk.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
