暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board SODIMM memory module with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-PIN SODIMM POSIFLEX EK-1552 memory upgrade

SKU CH-XTKT-CQVA1

16 GB DDR4-3200 SODIMM module rated CL22 at 1.2 V for POSIFLEX EK-1552 kiosks

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 3200 MHz boosts POS terminal responsiveness
  • CL22 latency at 1.2 V keeps power draw low
  • 2Rx8 dual-rank layout maximises memory density
  • 260-pin SODIMM fits POSIFLEX EK-1552 Mercury kiosks
  • Major OEM chips stress-tested for mission-critical stability

POSIFLEX EK-1552 SODIMM upgrade

This NEMIX RAM module delivers 16GB of DDR4 memory at 3200MHz for the POSIFLEX EK-1552 Mercury Series kiosk. It operates at 1.2V with CL22 latency and a 2Rx8 organisation. The 260-pin SODIMM form factor fits the system's memory slot directly. No heat spreader is included on the module.

Kiosk operators needing a single 16GB stick

Technicians maintaining POSIFLEX Mercury Series kiosks can install this part to restore or expand system memory. Builders working on other platforms or requiring ECC error correction should look at a different module. Systems that need registered or buffered memory are not supported by this unbuffered design.

2Rx8 rank configuration for the EK-1552

The module uses a 2Rx8 layout that matches the kiosk's memory controller requirements. Verify the service manual specifies this rank structure before ordering. A mismatched rank can prevent the system from posting or recognising the full capacity.

特長

  • 16 GB DDR4 3200 MHz boosts POS terminal responsiveness
  • CL22 latency at 1.2 V keeps power draw low
  • 2Rx8 dual-rank layout maximises memory density
  • 260-pin SODIMM fits POSIFLEX EK-1552 Mercury kiosks
  • Major OEM chips stress-tested for mission-critical stability

仕様

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

この商品に関する質問

Should I choose the 16 GB single module or look for a dual-channel kit?

The listing supplies one 16 GB SODIMM. If the POSIFLEX EK-1552 has two slots, adding a second identical module later will enable dual-channel bandwidth.

What does the 3200 MHz rating deliver inside the EK-1552 kiosk?

The module runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.2 V, giving the maximum JEDEC speed the platform’s memory controller supports.

Is the 260-pin SODIMM interface compatible with the POSIFLEX EK-1552?

Yes — the 260-pin DDR4 SODIMM form factor matches the slot used in the EK-1552 Mercury Series kiosk.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。