BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00278477BTC
متوفر
NEMIX RAM
NEMIX RAM 16GB DDR5 5600 CL46 1.1V UDIMM SuperMicro C9Z890-MW memory upgrade
16 GB DDR5-5600 CL46 1.1 V UDIMM validated for SuperMicro C9Z890-MW motherboards
- Capacity16GB
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 16 GB capacity for larger workloads
- DDR5 5600 speed for faster data rates
- CL46 latency for responsive timing
- 1 V operation for lower power draw
- Validated for SuperMicro C9Z890-MW motherboard
16GB DDR5 5600 UDIMM for SuperMicro C9Z890-MW
This module adds 16GB of DDR5 memory to the SuperMicro C9Z890-MW motherboard. It runs at 5600 MT/s with CL46 latency at 1.10V. The unbuffered, non-ECC design uses a single 1Rx8 rank in a 288-pin UDIMM form factor.
Suits single-slot upgrades on the named SuperMicro
Builders who need ECC error correction or registered modules should look elsewhere. Systems that require a different pin count, voltage, or speed rating cannot use this kit. Capacity seekers wanting more than 16GB per slot must choose higher-density parts.
Speed locked to DDR5 5600 MT/s PC5-44800
The module operates only at the stated 5600 MT/s data rate with CL46 timings. It will not run at higher or lower DDR5 speeds unless the platform forces a compatible JEDEC profile. Verify that the SuperMicro C9Z890-MW firmware supports this exact speed before purchase.
أبرز المميزات
- 16 GB capacity for larger workloads
- DDR5 5600 speed for faster data rates
- CL46 latency for responsive timing
- 1 V operation for lower power draw
- Validated for SuperMicro C9Z890-MW motherboard
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 5600MHZ Non-ECC Unbuffered RAM |
| Part Number | MD44800-618K1 |
| Capacity | 16GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM |
أسئلة حول هذا المنتج
Will the 288-pin DDR5 UDIMM fit the SuperMicro C9Z890-MW motherboard slots?
Yes, the 288-pin DDR5 UDIMM form factor matches the standard DDR5 DIMM slots on the SuperMicro C9Z890-MW motherboard.
What is the correct orientation step when installing this 1Rx8 module into the C9Z890-MW?
Align the notch on the module's gold edge connector with the key in the DDR5 slot, press down firmly until both side clips click shut.
Does the 1.1V CL46 DDR5 module require any firmware update or replacement schedule?
No firmware update is needed; the module runs at 1.1V with CL46 timings and has no moving parts, so no scheduled replacement is required.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
