We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board DDR5 UDIMM memory module

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1.1V UDIMM SuperMicro C9Z890-MW memory upgrade

SKU CH-3SB6-WEXYH

16 GB DDR5-5600 CL46 1.1 V UDIMM validated for SuperMicro C9Z890-MW motherboards

  • Capacity16GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 16 GB capacity for larger workloads
  • DDR5 5600 speed for faster data rates
  • CL46 latency for responsive timing
  • 1 V operation for lower power draw
  • Validated for SuperMicro C9Z890-MW motherboard

16GB DDR5 5600 UDIMM for SuperMicro C9Z890-MW

This module adds 16GB of DDR5 memory to the SuperMicro C9Z890-MW motherboard. It runs at 5600 MT/s with CL46 latency at 1.10V. The unbuffered, non-ECC design uses a single 1Rx8 rank in a 288-pin UDIMM form factor.

Suits single-slot upgrades on the named SuperMicro

Builders who need ECC error correction or registered modules should look elsewhere. Systems that require a different pin count, voltage, or speed rating cannot use this kit. Capacity seekers wanting more than 16GB per slot must choose higher-density parts.

Speed locked to DDR5 5600 MT/s PC5-44800

The module operates only at the stated 5600 MT/s data rate with CL46 timings. It will not run at higher or lower DDR5 speeds unless the platform forces a compatible JEDEC profile. Verify that the SuperMicro C9Z890-MW firmware supports this exact speed before purchase.

Highlights

  • 16 GB capacity for larger workloads
  • DDR5 5600 speed for faster data rates
  • CL46 latency for responsive timing
  • 1 V operation for lower power draw
  • Validated for SuperMicro C9Z890-MW motherboard

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 5600MHZ Non-ECC Unbuffered RAM
Part NumberMD44800-618K1
Capacity16GB
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 UDIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 5600MHZ PC5-44800 1Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM

Questions about this item

Will the 288-pin DDR5 UDIMM fit the SuperMicro C9Z890-MW motherboard slots?

Yes, the 288-pin DDR5 UDIMM form factor matches the standard DDR5 DIMM slots on the SuperMicro C9Z890-MW motherboard.

What is the correct orientation step when installing this 1Rx8 module into the C9Z890-MW?

Align the notch on the module's gold edge connector with the key in the DDR5 slot, press down firmly until both side clips click shut.

Does the 1.1V CL46 DDR5 module require any firmware update or replacement schedule?

No firmware update is needed; the module runs at 1.1V with CL46 timings and has no moving parts, so no scheduled replacement is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.