SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 US$
0.00499179BTC
متوفر
NEMIX RAM
NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 ECC RDIMM Supermicro H13DSG-O-CPU memory upgrade
16 GB DDR5 5600 CL46 1Rx8 ECC registered RDIMM for Supermicro H13DSG-O-CPU
- Capacity16GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- Exact DDR5-5600 spec match ensures full-speed recognition
- Registered ECC design corrects single-bit errors automatically
- 1Rx8 rank and 1.1V voltage align with board requirements
- 288-pin RDIMM form factor fits Supermicro H13DSG-O-CPU slots
- Lifetime replacement warranty with US-based technical support
Supermicro H13DSG-O-CPU memory upgrade
This 16 GB DDR5 RDIMM is built as an exact-match upgrade for the Supermicro H13DSG-O-CPU motherboard. It delivers registered ECC memory that the platform requires for stable, full-capacity operation in server and workstation workloads.
16 GB capacity and DDR5-5600 headroom
The module runs at 5600 MT/s (PC5-44800) with CL46 latency at 1.1 V, providing the bandwidth and capacity headroom typical of single-rank registered DIMMs. Workloads that exceed 16 GB per slot or demand higher frequencies will need additional modules or a platform that supports faster DDR5 speeds.
Registered ECC RDIMM form factor
The 288-pin registered (buffered) design with on-die ECC is the single specification that determines compatibility; the board will not accept unbuffered UDIMMs or SODIMMs, and population rules in the system manual must be followed for correct operation.
أبرز المميزات
- Exact DDR5-5600 spec match ensures full-speed recognition
- Registered ECC design corrects single-bit errors automatically
- 1Rx8 rank and 1.1V voltage align with board requirements
- 288-pin RDIMM form factor fits Supermicro H13DSG-O-CPU slots
- Lifetime replacement warranty with US-based technical support
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
أسئلة حول هذا المنتج
Will this DDR5 5600 CL46 RDIMM run at its rated speed alongside existing DDR5 modules in my Supermicro H13DSG-O-CPU?
Yes, the 1Rx8 rank, 1.1 V voltage and CL46 timing match the board's memory-controller expectations, so the module is recognised at full capacity and operates at DDR5 5600 when populated per the manual.
How can I confirm the ECC registered module is functioning correctly after installation?
Check the BIOS or UEFI memory-info screen: it should show 16 GB, DDR5 5600, ECC enabled and registered mode active for the installed slot.
What is included in the package and do I need any extra parts to install it?
The box contains one 16 GB DDR5 5600 CL46 1.1 V 288-pin ECC RDIMM; no heat spreader or additional hardware is supplied or required for installation.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
