Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 1Rx8 ECC RDIMM Supermicro H13DSG-O-CPU memory upgrade

SKU CH-J145-KXVAX

16 GB DDR5 5600 CL46 1Rx8 ECC registered RDIMM for Supermicro H13DSG-O-CPU

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • Exact DDR5-5600 spec match ensures full-speed recognition
  • Registered ECC design corrects single-bit errors automatically
  • 1Rx8 rank and 1.1V voltage align with board requirements
  • 288-pin RDIMM form factor fits Supermicro H13DSG-O-CPU slots
  • Lifetime replacement warranty with US-based technical support

Supermicro H13DSG-O-CPU memory upgrade

This 16 GB DDR5 RDIMM is built as an exact-match upgrade for the Supermicro H13DSG-O-CPU motherboard. It delivers registered ECC memory that the platform requires for stable, full-capacity operation in server and workstation workloads.

16 GB capacity and DDR5-5600 headroom

The module runs at 5600 MT/s (PC5-44800) with CL46 latency at 1.1 V, providing the bandwidth and capacity headroom typical of single-rank registered DIMMs. Workloads that exceed 16 GB per slot or demand higher frequencies will need additional modules or a platform that supports faster DDR5 speeds.

Registered ECC RDIMM form factor

The 288-pin registered (buffered) design with on-die ECC is the single specification that determines compatibility; the board will not accept unbuffered UDIMMs or SODIMMs, and population rules in the system manual must be followed for correct operation.

Najważniejsze cechy

  • Exact DDR5-5600 spec match ensures full-speed recognition
  • Registered ECC design corrects single-bit errors automatically
  • 1Rx8 rank and 1.1V voltage align with board requirements
  • 288-pin RDIMM form factor fits Supermicro H13DSG-O-CPU slots
  • Lifetime replacement warranty with US-based technical support

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Pytania dotyczące tego produktu

Will this DDR5 5600 CL46 RDIMM run at its rated speed alongside existing DDR5 modules in my Supermicro H13DSG-O-CPU?

Yes, the 1Rx8 rank, 1.1 V voltage and CL46 timing match the board's memory-controller expectations, so the module is recognised at full capacity and operates at DDR5 5600 when populated per the manual.

How can I confirm the ECC registered module is functioning correctly after installation?

Check the BIOS or UEFI memory-info screen: it should show 16 GB, DDR5 5600, ECC enabled and registered mode active for the installed slot.

What is included in the package and do I need any extra parts to install it?

The box contains one 16 GB DDR5 5600 CL46 1.1 V 288-pin ECC RDIMM; no heat spreader or additional hardware is supplied or required for installation.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.