نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Two green circuit boards with black memory chips and gold edge connectors side by side

NEMIX RAM

NEMIX RAM 16GB DDR5 5600 CL46 2x8GB Supermicro X13SAQ memory upgrade

SKU CH-WHM6-15PXJ

A 16 GB DDR5 kit built for the Supermicro X13SAQ with 5600 MT/s speed and CL46 timing

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 16GB 2X8GB

  • 16 GB dual-channel kit doubles capacity for multitasking headroom
  • DDR5 5600 MT/s rating matches the board's native speed profile
  • CL46 latency and 1.10 V operation meet the controller's exact timing needs
  • 288-pin UDIMM form factor fits the Supermicro X13SAQ DIMM slots precisely
  • Major OEM DRAM chips tested at rated speed for stable operation

Exact DDR5 upgrade for Supermicro X13SAQ

This 16 GB kit delivers two 8 GB DDR5 5600 modules built to the CL46 1.1 V 1Rx8 specification the motherboard expects. The 288-pin unbuffered UDIMM form factor matches the board slots exactly. Major OEM chips from Samsung, Micron or Hynix provide tested stability at the rated speed.

Suits owners of the Supermicro X13SAQ adding

Builders using a different motherboard, a server board that requires ECC registered DIMMs, or a laptop needing SODIMMs cannot use this kit. Systems that demand higher-capacity single modules or lower-latency timings should look at other configurations.

5600 CL46 1.1 V DDR5 UDIMM specification

The single figure that decides fitment is the DDR5 5600 CL46 1.1 V unbuffered UDIMM profile. If your motherboard manual lists this exact speed, timing and voltage for 1Rx8 modules, the kit will be recognised at full capacity and run at its rated speed.

أبرز المميزات

  • 16 GB dual-channel kit doubles capacity for multitasking headroom
  • DDR5 5600 MT/s rating matches the board's native speed profile
  • CL46 latency and 1.10 V operation meet the controller's exact timing needs
  • 288-pin UDIMM form factor fits the Supermicro X13SAQ DIMM slots precisely
  • Major OEM DRAM chips tested at rated speed for stable operation

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB 2X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Is the 16 GB kit sold as 2 x 8 GB modules the only capacity option for this Supermicro X13SAQ upgrade?

The listing shows a single 16 GB kit built from two 8 GB UDIMMs; no other capacities are offered for this part number.

What does the DDR5-5600 (PC5-44800) rating mean once the modules are installed in the X13SAQ?

The board's memory controller will run the kit at 5600 MT/s with CL46 latency at 1.1 V, delivering the rated bandwidth without manual tuning.

Does the 288-pin DDR5 UDIMM interface limit the speed on this motherboard compared to registered or ECC modules?

The unbuffered 288-pin UDIMM form factor is exactly what the X13SAQ requires, so the kit operates at its full 5600 MT/s rating without down-clocking.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.