نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

NEMIX RAM

NEMIX RAM 1TB 16x64GB DDR5 5600MHz ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-S7EW-K95SA

A 1TB kit of sixteen 64GB DDR5 5600MHz ECC Registered RDIMMs validated for the Supermicro H14DST-FL motherboard

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 1TB capacity across 16 modules of 64GB each
  • DDR5 5600 speed rated at PC5-44800 for full rated throughput
  • ECC registered RDIMM design corrects single-bit errors on the fly
  • 2Rx4 rank and 1.1V voltage match the server memory controller exactly
  • 288-pin form factor verified for Supermicro H14DST-FL motherboard

Exact 1TB DDR5 kit for Supermicro H14DST-FL

This 16-module kit delivers 1TB of DDR5-5600 Registered ECC memory in 64GB RDIMMs. It is built for the Supermicro H14DST-FL motherboard and matches the exact rank, voltage and timing the board's memory controller expects. Enterprise workloads that need full-capacity stability across every slot are the target use case.

Straightforward RDIMM install with population rules

Each 288-pin RDIMM seats in the standard DDR5 slots, but the H14DST-FL requires a specific DIMM population order to reach full capacity and rated speed. Installing modules in the wrong sequence or mixing ranks will prevent the system from recognising the full 1TB. Always follow the motherboard manual's population table before powering on.

DDR5-5600 bandwidth ceiling at 1.1V

The PC5-44800 interface caps peak transfer rate at the rated 5600 MT/s per module, and the Registered design adds one cycle of buffering latency. CL46 timing at 1.1V is the JEDEC baseline, so there is no headroom for higher frequencies or tighter latencies on this platform. Workloads that scale beyond this bandwidth will need a newer memory standard.

أبرز المميزات

  • 1TB capacity across 16 modules of 64GB each
  • DDR5 5600 speed rated at PC5-44800 for full rated throughput
  • ECC registered RDIMM design corrects single-bit errors on the fly
  • 2Rx4 rank and 1.1V voltage match the server memory controller exactly
  • 288-pin form factor verified for Supermicro H14DST-FL motherboard

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

How do I confirm the kit is running at DDR5 5600 with CL46 after installation?

Enter the BIOS or use a tool like dmidecode to verify each module shows 5600 MT/s, CL46 timings, 1.10 V, and 2Rx4 registered ECC operation across all 16 slots.

What does the package include and what must I source separately?

The box contains the 1 TB kit of 16 x 64 GB DDR5 5600 CL46 1.10 V 288-pin ECC RDIMMs; no cables, brackets, or additional hardware are included.

Which capacity or version of this kit should I choose for the Supermicro H14DST-FL?

Select the 1 TB 16 x 64 GB DDR5 5600 CL46 2Rx4 RDIMM kit (part MR44800-924K16) to match the board's validated population rules and voltage requirements.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.