我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 1TB 16x64GB DDR5 5600MHz ECC RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-S7EW-K95SA

A 1TB kit of sixteen 64GB DDR5 5600MHz ECC Registered RDIMMs validated for the Supermicro H14DST-FL motherboard

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 1TB capacity across 16 modules of 64GB each
  • DDR5 5600 speed rated at PC5-44800 for full rated throughput
  • ECC registered RDIMM design corrects single-bit errors on the fly
  • 2Rx4 rank and 1.1V voltage match the server memory controller exactly
  • 288-pin form factor verified for Supermicro H14DST-FL motherboard

Exact 1TB DDR5 kit for Supermicro H14DST-FL

This 16-module kit delivers 1TB of DDR5-5600 Registered ECC memory in 64GB RDIMMs. It is built for the Supermicro H14DST-FL motherboard and matches the exact rank, voltage and timing the board's memory controller expects. Enterprise workloads that need full-capacity stability across every slot are the target use case.

Straightforward RDIMM install with population rules

Each 288-pin RDIMM seats in the standard DDR5 slots, but the H14DST-FL requires a specific DIMM population order to reach full capacity and rated speed. Installing modules in the wrong sequence or mixing ranks will prevent the system from recognising the full 1TB. Always follow the motherboard manual's population table before powering on.

DDR5-5600 bandwidth ceiling at 1.1V

The PC5-44800 interface caps peak transfer rate at the rated 5600 MT/s per module, and the Registered design adds one cycle of buffering latency. CL46 timing at 1.1V is the JEDEC baseline, so there is no headroom for higher frequencies or tighter latencies on this platform. Workloads that scale beyond this bandwidth will need a newer memory standard.

商品特色

  • 1TB capacity across 16 modules of 64GB each
  • DDR5 5600 speed rated at PC5-44800 for full rated throughput
  • ECC registered RDIMM design corrects single-bit errors on the fly
  • 2Rx4 rank and 1.1V voltage match the server memory controller exactly
  • 288-pin form factor verified for Supermicro H14DST-FL motherboard

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

How do I confirm the kit is running at DDR5 5600 with CL46 after installation?

Enter the BIOS or use a tool like dmidecode to verify each module shows 5600 MT/s, CL46 timings, 1.10 V, and 2Rx4 registered ECC operation across all 16 slots.

What does the package include and what must I source separately?

The box contains the 1 TB kit of 16 x 64 GB DDR5 5600 CL46 1.10 V 288-pin ECC RDIMMs; no cables, brackets, or additional hardware are included.

Which capacity or version of this kit should I choose for the Supermicro H14DST-FL?

Select the 1 TB 16 x 64 GB DDR5 5600 CL46 2Rx4 RDIMM kit (part MR44800-924K16) to match the board's validated population rules and voltage requirements.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。