SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 US$
0.00498556BTC
متوفر
NEMIX RAM
NEMIX RAM 1TB (8x128GB) DDR5 4800 CL40 4Rx4 ECC RDIMM SuperMicro X13SEI-F X13SEI-TF memory upgrade
Eight 128 GB DDR5 4800 CL40 registered ECC modules add 1 TB to SuperMicro X13SEI-F and X13SEI-TF servers
- Capacity1TB (8 x 128GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 1TB total capacity with eight 128GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered design for server data integrity
- 4Rx4 quad-rank layout with CL40 latency
- 1V operating voltage on 288-pin RDIMM form factor
1TB DDR5 ECC RDIMM kit
This NEMIX RAM kit supplies 1TB of DDR5 memory through eight 128GB registered DIMMs. Each module runs at 4800MT/s with CL40 latency at 1.1V and uses a 4Rx4 organisation with on-die ECC. The 288-pin RDIMM form factor is built for Supermicro X13SEI-F and X13SEI-TF motherboards.
Suited for memory-hungry servers; not for desktops
These registered ECC modules are intended for Supermicro server platforms that require registered memory and can populate eight slots. Workstations or consumer boards that only accept unbuffered non-ECC DIMMs cannot use this kit. Buyers needing lower capacities or standard UDIMMs should choose a different product.
Eight-slot registered DDR5 requirement
The kit delivers its full 1TB only when all eight DIMM slots are filled with registered DDR5 modules supported by the target Supermicro motherboards. Systems with fewer slots, different memory architectures or unbuffered-only controllers cannot utilise this configuration.
أبرز المميزات
- 1TB total capacity with eight 128GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered design for server data integrity
- 4Rx4 quad-rank layout with CL40 latency
- 1V operating voltage on 288-pin RDIMM form factor
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K8 |
| Capacity | 1TB (8 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 1TB (8X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
أسئلة حول هذا المنتج
How does the 4800 MT/s data rate translate to throughput in a SuperMicro X13SEI-F system?
The DDR5 4800 modules run at PC5-38400, so each channel can move up to 38400 MB/s of bandwidth when the memory controller operates at the rated data rate.
What does the PC5-38400 label cap in practice for this registered ECC kit?
PC5-38400 caps the peak transfer rate at 38400 MB/s per channel; the registered ECC design adds one cycle of buffering and error correction without changing that ceiling.
Will the 288-pin 128 GB 4Rx4 modules clear the CPU cooler on a SuperMicro X13SEI-TF board?
The 288-pin DDR5 RDIMM sticks have no heat spreader and follow the standard low-profile height, so they fit the X13SEI-TF DIMM slots without interfering with typical server coolers.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
