我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 1TB (8x128GB) DDR5 4800 CL40 4Rx4 ECC RDIMM SuperMicro X13SEI-F X13SEI-TF memory upgrade

SKU CH-FK41-HD98W

Eight 128 GB DDR5 4800 CL40 registered ECC modules add 1 TB to SuperMicro X13SEI-F and X13SEI-TF servers

  • Capacity1TB (8 x 128GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 1TB total capacity with eight 128GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design for server data integrity
  • 4Rx4 quad-rank layout with CL40 latency
  • 1V operating voltage on 288-pin RDIMM form factor

1TB DDR5 ECC RDIMM kit

This NEMIX RAM kit supplies 1TB of DDR5 memory through eight 128GB registered DIMMs. Each module runs at 4800MT/s with CL40 latency at 1.1V and uses a 4Rx4 organisation with on-die ECC. The 288-pin RDIMM form factor is built for Supermicro X13SEI-F and X13SEI-TF motherboards.

Suited for memory-hungry servers; not for desktops

These registered ECC modules are intended for Supermicro server platforms that require registered memory and can populate eight slots. Workstations or consumer boards that only accept unbuffered non-ECC DIMMs cannot use this kit. Buyers needing lower capacities or standard UDIMMs should choose a different product.

Eight-slot registered DDR5 requirement

The kit delivers its full 1TB only when all eight DIMM slots are filled with registered DDR5 modules supported by the target Supermicro motherboards. Systems with fewer slots, different memory architectures or unbuffered-only controllers cannot utilise this configuration.

商品特色

  • 1TB total capacity with eight 128GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered design for server data integrity
  • 4Rx4 quad-rank layout with CL40 latency
  • 1V operating voltage on 288-pin RDIMM form factor

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-744K8
Capacity1TB (8 x 128GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank4Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content1TB (8X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

商品問答

How does the 4800 MT/s data rate translate to throughput in a SuperMicro X13SEI-F system?

The DDR5 4800 modules run at PC5-38400, so each channel can move up to 38400 MB/s of bandwidth when the memory controller operates at the rated data rate.

What does the PC5-38400 label cap in practice for this registered ECC kit?

PC5-38400 caps the peak transfer rate at 38400 MB/s per channel; the registered ECC design adds one cycle of buffering and error correction without changing that ceiling.

Will the 288-pin 128 GB 4Rx4 modules clear the CPU cooler on a SuperMicro X13SEI-TF board?

The 288-pin DDR5 RDIMM sticks have no heat spreader and follow the standard low-profile height, so they fit the X13SEI-TF DIMM slots without interfering with typical server coolers.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。