OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
NEMIX RAM
32 GB DDR5 ECC RDIMM running at 4800 MT/s with CL40 latency and 1.1 V operation
This NEMIX RAM module delivers 32 GB of DDR5 memory at 4800 MT/s with CL40 latency and 1.10 V operation. It uses a 1Rx4 registered ECC design on a 288-pin RDIMM form factor for data-integrity workloads. Major OEM chips from Samsung, Micron or Hynix are used. No heat spreader is fitted.
Systems that accept only unbuffered non-ECC UDIMMs cannot use this module. Boards lacking DDR5 support will not fit the 288-pin DDR5 keying. Workstations requiring higher capacity per slot or lower latency should consider other options.
The PC5-38400 rating confirms 4800 MT/s data transfer for compatible server motherboards. Verify your platform supports this speed and registered ECC DIMMs before purchase. The CL40 timing and 1Rx4 organisation are fixed by the module design.
| Brand | NEMIX RAM |
|---|---|
| Series | Hynix Series Server Memory |
| Model | Hynix Compatible DDR5 ECC Registered RDIMM |
| Part Number | MR38400-314 |
| Capacity | 32GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Motherboard Compatible |
The module runs at 4800 MT/s; actual throughput depends on the motherboard memory controller and the number of populated channels.
It requires a DDR5 RDIMM slot with 288 pins and 1.1 V support; the module has no heat spreader, so it fits standard DIMM spacing.
Install with power off, seat firmly until the clips lock, then enable ECC in the system BIOS so the registered buffer and error correction become active.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟