نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz 1.35V 204-Pin SODIMM POSIFLEX RT-2015 memory upgrade

SKU CH-H365-55Q10

4GB DDR3 1333MHz SODIMM upgrade for POSIFLEX RT-2015 terminal, 1.35V low-voltage operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4GB capacity adds multitasking headroom for POS terminals
  • DDR3 1333MHz speed matches system bus for stable throughput
  • 35V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX RT-2015 slot directly
  • CL9 latency with 2Rx8 organisation supports responsive transaction processing

NEMIX RAM 4GB DDR3 SODIMM for POSIFLEX RT-2015

This 4GB DDR3 1333MHz SODIMM is built for the POSIFLEX RT-2015 terminal. It runs at 1.35V with CL9 latency and uses a 204-pin unbuffered non-ECC layout. The module is validated for point-of-sale workloads and installs in a single slot.

Suits POSIFLEX RT-2015 upgrades.

This memory fits the POSIFLEX RT-2015 mid-range terminal only. Buyers who need a different form factor, higher capacity, ECC support or a newer DDR generation should look at other parts. The module is not compatible with desktop DIMM slots or laptop models outside the specified series.

204-pin DDR3 SODIMM interface decides fit

The 204-pin DDR3 SODIMM interface is the single specification that determines compatibility. Only systems accepting DDR3 1333MHz PC3-10600 unbuffered non-ECC modules at 1.35V with 2Rx8 organisation will accept this part. Verify the terminal manual before purchase.

أبرز المميزات

  • 4GB capacity adds multitasking headroom for POS terminals
  • DDR3 1333MHz speed matches system bus for stable throughput
  • 35V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX RT-2015 slot directly
  • CL9 latency with 2Rx8 organisation supports responsive transaction processing

المواصفات

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

أسئلة حول هذا المنتج

What type of memory slot must the POSIFLEX RT-2015 terminal have for this 204-pin SODIMM to fit?

The terminal must provide a DDR3 SODIMM socket that accepts 204-pin modules; this is the physical interface used by the POSIFLEX RT-2015 series.

Will this PC3-10600 CL9 module run stably if the terminal already has slower DDR3 memory installed?

Yes, the module will down-clock to match the slower memory's speed and latency, allowing mixed-speed operation without instability.

How can I verify the module is recognised at the correct 1333 MHz speed after installation?

Enter the system BIOS or use a hardware-information utility; the memory summary should report 1333 MHz (PC3-10600) and CL9 timings for the new module.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.