We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz 1.35V 204-Pin SODIMM POSIFLEX RT-2015 memory upgrade

SKU CH-H365-55Q10

4GB DDR3 1333MHz SODIMM upgrade for POSIFLEX RT-2015 terminal, 1.35V low-voltage operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4GB capacity adds multitasking headroom for POS terminals
  • DDR3 1333MHz speed matches system bus for stable throughput
  • 35V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX RT-2015 slot directly
  • CL9 latency with 2Rx8 organisation supports responsive transaction processing

NEMIX RAM 4GB DDR3 SODIMM for POSIFLEX RT-2015

This 4GB DDR3 1333MHz SODIMM is built for the POSIFLEX RT-2015 terminal. It runs at 1.35V with CL9 latency and uses a 204-pin unbuffered non-ECC layout. The module is validated for point-of-sale workloads and installs in a single slot.

Suits POSIFLEX RT-2015 upgrades.

This memory fits the POSIFLEX RT-2015 mid-range terminal only. Buyers who need a different form factor, higher capacity, ECC support or a newer DDR generation should look at other parts. The module is not compatible with desktop DIMM slots or laptop models outside the specified series.

204-pin DDR3 SODIMM interface decides fit

The 204-pin DDR3 SODIMM interface is the single specification that determines compatibility. Only systems accepting DDR3 1333MHz PC3-10600 unbuffered non-ECC modules at 1.35V with 2Rx8 organisation will accept this part. Verify the terminal manual before purchase.

Highlights

  • 4GB capacity adds multitasking headroom for POS terminals
  • DDR3 1333MHz speed matches system bus for stable throughput
  • 35V low-voltage operation reduces power draw and heat
  • 204-pin SODIMM form factor fits POSIFLEX RT-2015 slot directly
  • CL9 latency with 2Rx8 organisation supports responsive transaction processing

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

What type of memory slot must the POSIFLEX RT-2015 terminal have for this 204-pin SODIMM to fit?

The terminal must provide a DDR3 SODIMM socket that accepts 204-pin modules; this is the physical interface used by the POSIFLEX RT-2015 series.

Will this PC3-10600 CL9 module run stably if the terminal already has slower DDR3 memory installed?

Yes, the module will down-clock to match the slower memory's speed and latency, allowing mixed-speed operation without instability.

How can I verify the module is recognised at the correct 1333 MHz speed after installation?

Enter the system BIOS or use a hardware-information utility; the memory summary should report 1333 MHz (PC3-10600) and CL9 timings for the new module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.