SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 US$
0.00500837BTC
متوفر
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR4 2666MHz ECC RDIMM CL19 memory upgrade
64 GB DDR4-2666 ECC registered RDIMM kit (2 × 32 GB, CL19, 1.2 V, 288-pin) validated for Synology FlashStation FS3410 NAS
- Capacity64GB (2 x 32GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 64 GB kit doubles NAS capacity with two 32 GB modules
- ECC registered design protects data integrity in Synology FS3410
- DDR4 2666 MHz CL19 matches system timing for stable operation
- 2 V low-voltage modules reduce power draw in 24/7 server use
- Built with major OEM chips and stress-tested for enterprise reliability
Synology FS3410 ECC memory kit
This 64GB kit uses two 32GB DDR4 2666MHz registered DIMMs built for the Synology FlashStation FS3410 NAS. ECC and registered signalling protect data integrity in continuous server workloads. The modules run at 1.2V with CL19 latency and a 2Rx4 rank structure. They install in the standard 288-pin DDR4 slots provided by the platform.
Upgrade from non-ECC or lower capacity
Replacing unbuffered non-ECC memory removes the single-bit error risk that can corrupt databases or file systems under heavy load. Moving from 32GB or smaller configurations to 64GB lets the NAS cache more metadata and serve more concurrent users without swapping. The jump is worth it when the unit runs virtual machines, container clusters or large-volume backup jobs that exceed the current memory ceiling.
DDR4 RDIMM platform limits
Registered DDR4 modules require a memory controller that supports buffered signalling; they will not function in desktop or consumer laptop boards that expect unbuffered DIMMs. Maximum capacity and population rules are defined by the FS3410 motherboard and BIOS, not by the kit itself. The 2666MHz speed is the rated JEDEC frequency; actual throughput depends on the system memory controller and slot configuration.
أبرز المميزات
- 64 GB kit doubles NAS capacity with two 32 GB modules
- ECC registered design protects data integrity in Synology FS3410
- DDR4 2666 MHz CL19 matches system timing for stable operation
- 2 V low-voltage modules reduce power draw in 24/7 server use
- Built with major OEM chips and stress-tested for enterprise reliability
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR21300-324K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR4 2666MHZ PC4-21300 2Rx4 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory KIT |
أسئلة حول هذا المنتج
Does the 288-pin RDIMM form factor fit the Synology FlashStation FS3410 NAS?
Yes, the 288-pin DDR4 RDIMM form factor is the correct physical interface for the Synology FlashStation FS3410 NAS.
What is the correct way to install the two 32GB modules so the server recognises the full 64GB?
Power down the NAS, open the chassis, insert each module firmly into the memory slots until the retention clips click, then power on and verify 64GB in DSM.
Will the Samsung, Micron or Hynix chips used in these modules require any firmware updates or replacement over time?
The major OEM chips are validated for long-term stability; no firmware updates or scheduled replacement are needed for the memory itself.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
