نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with black memory chips, 260 gold pins, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2666 SODIMM SuperMicro memory upgrade

SKU CH-3EPD-NWM3S

An 8 GB DDR4 2666 SODIMM module validated for SuperMicro systems, running at 1.2 V with CL19 latency

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity adds responsive multitasking headroom
  • DDR4 2666 speed matches SuperMicro system requirements
  • 20V low voltage reduces power draw and heat
  • CL19 latency supports stable server workloads
  • 260-pin SODIMM form factor fits compatible SuperMicro slots

8 GB DDR4 SODIMM for Supermicro servers

This 8 GB DDR4 2666 SODIMM is built for Supermicro server and workstation platforms that accept unbuffered non-ECC memory. It targets administrators and integrators who need a straightforward capacity increase in compatible 260-pin slots. The module uses major OEM DRAM from Samsung, Micron or Hynix and runs at the standard 1.20 V. It is not suited for systems that require registered or ECC DIMMs.

Capacity and headroom

A single 8 GB rank (1Rx8) at DDR4 2666 (PC4-21300) CL19 adds usable memory for typical multi-tasking, virtualisation hosts and database workloads that fit within this footprint. Headroom ends when the working set exceeds the installed capacity or when the platform demands ECC or registered modules. The non-ECC unbuffered design limits use to boards that explicitly support this configuration.

Thermals noise and power

Without a heat spreader the module relies on chassis airflow, drawing 1.20 V at the rated speed. Power consumption stays low for DDR4 SODIMM form factors and produces no audible noise. Thermal headroom is adequate for normal server environments with proper case ventilation; sustained heavy loads in restricted airflow may require additional cooling attention.

أبرز المميزات

  • 8GB capacity adds responsive multitasking headroom
  • DDR4 2666 speed matches SuperMicro system requirements
  • 20V low voltage reduces power draw and heat
  • CL19 latency supports stable server workloads
  • 260-pin SODIMM form factor fits compatible SuperMicro slots

المواصفات

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-818K1
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

أسئلة حول هذا المنتج

Will this DDR4 2666 CL19 SODIMM run alongside existing DDR4 2666 modules in my SuperMicro system?

Yes, matching speed and latency helps the memory controller keep all slots at 2666 MHz; mixing slower sticks would force the whole array down to the lowest common speed.

How can I verify the module is detected at 2666 MHz with CL19 timings after installation?

Check the BIOS memory information screen or run a tool such as CPU-Z; it should report DDR4-2666, 1.20 V, CAS 19 and a single 8 GB rank.

Does the package include only the 260-pin SODIMM or are any brackets or cables supplied?

The box contains one 8 GB 260-pin DDR4 SODIMM and nothing else; no brackets, cables or tools are included.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.