نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 PC4-25600 CL22 260-pin SODIMM for POSIFLEX JK-3252 memory upgrade

SKU CH-WZ8R-PA9TG

8GB DDR4 3200 SODIMM upgrades POSIFLEX JK-3252 kiosks with CL22 timing and 1.2V operation

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity adds headroom for POS multitasking
  • DDR4 3200 speed matches system bus for smooth operation
  • CL22 latency keeps response tight under load
  • 2V low voltage reduces heat in kiosk enclosures
  • 260-pin SODIMM form factor fits POSIFLEX JK-3252 slot exactly

System-specific DDR4 SODIMM for POSIFLEX JK-3252

This 260-pin module is built for the POSIFLEX JK-3252 Cachet Series kiosk. It delivers a straightforward capacity increase for point-of-sale workloads that run on this specific platform. Installation follows the standard SODIMM procedure outlined in the system manual.

8 GB capacity at DDR4 3200 with CL22 timing

The single 8 GB rank handles typical POS transactions, inventory look-ups and peripheral drivers without paging. Heavier multi-tasking or large local databases will exceed the available memory and require additional slots or a higher-density module. Speed is rated at PC4-25600 with 1.2 V operation.

2Rx8 dual-rank organisation on 260-pin DDR4 SODIMM

The dual-rank 2Rx8 layout is the decisive compatibility factor for the JK-3252 memory controller. Systems expecting a single-rank module may not recognise the full capacity or may fail to post. Verify the board accepts 2Rx8 before purchase.

أبرز المميزات

  • 8GB capacity adds headroom for POS multitasking
  • DDR4 3200 speed matches system bus for smooth operation
  • CL22 latency keeps response tight under load
  • 2V low voltage reduces heat in kiosk enclosures
  • 260-pin SODIMM form factor fits POSIFLEX JK-3252 slot exactly

المواصفات

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

أسئلة حول هذا المنتج

Will this DDR4 3200 SODIMM run stably alongside any existing memory already installed in my POSIFLEX JK-3252?

The module operates at the standard DDR4 1.20 V and uses the common 2Rx8 organisation, so it will match the electrical and timing requirements of the JK-3252 platform when added to occupied slots.

How can I verify the new 8 GB module is recognised and running at the correct 3200 MT/s speed after installation?

After powering on, enter the system BIOS or UEFI and check the memory information screen; it should show the installed capacity as 8 GB and the operating frequency at 3200 with CL22 timings.

Does the package contain only the single 260-pin SODIMM, or are tools and additional parts included?

The box contains one 8 GB DDR4 3200 PC4-25600 2Rx8 1.2 V CL22 260-pin Non-ECC Unbuffered SODIMM; no tools, brackets or extra components are supplied.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.