BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277711BTC
Auf Lager
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 PC4-25600 CL22 260-pin SODIMM for POSIFLEX JK-3252 memory upgrade
8GB DDR4 3200 SODIMM upgrades POSIFLEX JK-3252 kiosks with CL22 timing and 1.2V operation
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB capacity adds headroom for POS multitasking
- DDR4 3200 speed matches system bus for smooth operation
- CL22 latency keeps response tight under load
- 2V low voltage reduces heat in kiosk enclosures
- 260-pin SODIMM form factor fits POSIFLEX JK-3252 slot exactly
System-specific DDR4 SODIMM for POSIFLEX JK-3252
This 260-pin module is built for the POSIFLEX JK-3252 Cachet Series kiosk. It delivers a straightforward capacity increase for point-of-sale workloads that run on this specific platform. Installation follows the standard SODIMM procedure outlined in the system manual.
8 GB capacity at DDR4 3200 with CL22 timing
The single 8 GB rank handles typical POS transactions, inventory look-ups and peripheral drivers without paging. Heavier multi-tasking or large local databases will exceed the available memory and require additional slots or a higher-density module. Speed is rated at PC4-25600 with 1.2 V operation.
2Rx8 dual-rank organisation on 260-pin DDR4 SODIMM
The dual-rank 2Rx8 layout is the decisive compatibility factor for the JK-3252 memory controller. Systems expecting a single-rank module may not recognise the full capacity or may fail to post. Verify the board accepts 2Rx8 before purchase.
Besonderheiten
- 8GB capacity adds headroom for POS multitasking
- DDR4 3200 speed matches system bus for smooth operation
- CL22 latency keeps response tight under load
- 2V low voltage reduces heat in kiosk enclosures
- 260-pin SODIMM form factor fits POSIFLEX JK-3252 slot exactly
Technische Daten
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Fragen zu diesem Artikel
Will this DDR4 3200 SODIMM run stably alongside any existing memory already installed in my POSIFLEX JK-3252?
The module operates at the standard DDR4 1.20 V and uses the common 2Rx8 organisation, so it will match the electrical and timing requirements of the JK-3252 platform when added to occupied slots.
How can I verify the new 8 GB module is recognised and running at the correct 3200 MT/s speed after installation?
After powering on, enter the system BIOS or UEFI and check the memory information screen; it should show the installed capacity as 8 GB and the operating frequency at 3200 with CL22 timings.
Does the package contain only the single 260-pin SODIMM, or are tools and additional parts included?
The box contains one 8 GB DDR4 3200 PC4-25600 2Rx8 1.2 V CL22 260-pin Non-ECC Unbuffered SODIMM; no tools, brackets or extra components are supplied.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
