SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 US$
0.00501831BTC
متوفر
NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 UDIMM memory upgrade
A 96GB kit of two 48GB DDR5 5600 CL46 unbuffered UDIMMs built for SuperMicro C9Z790-CG motherboards
- Capacity96GB (2 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96 GB total capacity in a dual-channel 2×48 GB kit
- DDR5 5600 speed rated at PC5-44800 for high throughput
- CL46 CAS latency at 1.10 V for efficient operation
- 288-pin UDIMM form factor with 2Rx8 organisation
- Validated for Supermicro C9Z790-CG motherboard compatibility
SuperMicro C9Z790-CG compatible kit
This 96 GB kit contains two 48 GB DDR5 5600 UDIMMs built for the SuperMicro C9Z790-CG motherboard. It targets workstation and server builders who need maximum capacity in a two-slot configuration. The modules are unbuffered, non-ECC and validated for that specific platform.
CL46 CAS latency at 5600 MT/s
The decisive specification is the CL46 timing at the rated 5600 MT/s data rate. This latency figure determines whether the memory meets the timing window required by the SuperMicro C9Z790-CG memory controller. Buyers who need tighter timings for latency-sensitive workloads should look elsewhere.
Low-voltage operation without heat spreaders
Running at 1.1 V, the modules draw minimal power and generate little heat despite the high density. No heat spreaders are fitted, so airflow across the bare PCB is sufficient for normal workloads. Acoustic impact is negligible because the kit adds no active cooling.
أبرز المميزات
- 96 GB total capacity in a dual-channel 2×48 GB kit
- DDR5 5600 speed rated at PC5-44800 for high throughput
- CL46 CAS latency at 1.10 V for efficient operation
- 288-pin UDIMM form factor with 2Rx8 organisation
- Validated for Supermicro C9Z790-CG motherboard compatibility
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 5600MHZ Non-ECC Unbuffered RAM |
| Part Number | MD44800-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 96GB (2X48GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT |
أسئلة حول هذا المنتج
What does CL46 mean for real-world responsiveness on a 5600 MT/s kit?
CL46 is the CAS latency figure; at 5600 MT/s the memory controller waits 46 clock cycles before the first data burst begins, which sets the baseline access delay for every read operation.
How does the DDR5 5600 PC5-44800 interface limit actual throughput?
The DDR5 5600 PC5-44800 rating caps the peak transfer rate at 44800 MB/s per module; real-world bandwidth will be lower due to protocol overhead and system latency.
Will these 288-pin UDIMM modules fit a standard desktop DIMM slot?
Yes, the kit uses the 288-pin DDR5 UDIMM form factor, which matches the physical slot and keying on compatible desktop motherboards such as the SuperMicro C9Z790-CG.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
