We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 UDIMM sticks, bare chips, no heat spreaders, 96 GB kit

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 UDIMM memory upgrade

SKU CH-VAG9-7FBNJ

A 96GB kit of two 48GB DDR5 5600 CL46 unbuffered UDIMMs built for SuperMicro C9Z790-CG motherboards

  • Capacity96GB (2 x 48GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 96 GB total capacity in a dual-channel 2×48 GB kit
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • CL46 CAS latency at 1.10 V for efficient operation
  • 288-pin UDIMM form factor with 2Rx8 organisation
  • Validated for Supermicro C9Z790-CG motherboard compatibility

SuperMicro C9Z790-CG compatible kit

This 96 GB kit contains two 48 GB DDR5 5600 UDIMMs built for the SuperMicro C9Z790-CG motherboard. It targets workstation and server builders who need maximum capacity in a two-slot configuration. The modules are unbuffered, non-ECC and validated for that specific platform.

CL46 CAS latency at 5600 MT/s

The decisive specification is the CL46 timing at the rated 5600 MT/s data rate. This latency figure determines whether the memory meets the timing window required by the SuperMicro C9Z790-CG memory controller. Buyers who need tighter timings for latency-sensitive workloads should look elsewhere.

Low-voltage operation without heat spreaders

Running at 1.1 V, the modules draw minimal power and generate little heat despite the high density. No heat spreaders are fitted, so airflow across the bare PCB is sufficient for normal workloads. Acoustic impact is negligible because the kit adds no active cooling.

Highlights

  • 96 GB total capacity in a dual-channel 2×48 GB kit
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • CL46 CAS latency at 1.10 V for efficient operation
  • 288-pin UDIMM form factor with 2Rx8 organisation
  • Validated for Supermicro C9Z790-CG motherboard compatibility

Specifications

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR5 5600MHZ Non-ECC Unbuffered RAM
Part NumberMD44800-4828K2
Capacity96GB (2 x 48GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-PIN DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content96GB (2X48GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN Non-ECC Unbuffered UDIMM KIT

Questions about this item

What does CL46 mean for real-world responsiveness on a 5600 MT/s kit?

CL46 is the CAS latency figure; at 5600 MT/s the memory controller waits 46 clock cycles before the first data burst begins, which sets the baseline access delay for every read operation.

How does the DDR5 5600 PC5-44800 interface limit actual throughput?

The DDR5 5600 PC5-44800 rating caps the peak transfer rate at 44800 MB/s per module; real-world bandwidth will be lower due to protocol overhead and system latency.

Will these 288-pin UDIMM modules fit a standard desktop DIMM slot?

Yes, the kit uses the 288-pin DDR5 UDIMM form factor, which matches the physical slot and keying on compatible desktop motherboards such as the SuperMicro C9Z790-CG.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.