نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green bare circuit board DDR5 RDIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 96GB DDR5 6400 CL52 2Rx4 1.1V ECC RDIMM H13SRA-F H13SRA-TF memory upgrade

SKU CH-8A7K-ZQ539

96 GB DDR5 6400 RDIMM with ECC and registered buffering, CL52 latency at 1.1 V, validated for Supermicro H13SRA-F and H13SRA-TF motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 96GB

عرض 6 تكوينات إضافية
  • 96 GB capacity lets you run large workloads in fewer slots
  • DDR5 6400 speed with CL52 latency delivers rated throughput on supported boards
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits Supermicro H13SRA-F and H13SRA-TF memory slots

Server Memory Upgrade

This 96 GB DDR5 registered DIMM delivers ECC protection at 6400 MT/s with CL52 latency. It is built for administrators expanding Supermicro H13SRA-F or H13SRA-TF platforms where data integrity and full-capacity population are required.

Build Integration

The 288-pin RDIMM form factor matches the board's registered-memory slots exactly; UDIMM or SODIMM modules will not fit. Registered architecture lets every supported slot run fully populated at rated speed, while on-die ECC corrects single-bit errors before they reach the OS.

Thermals and Power

Operating at 1.10 V without a heat spreader, the module relies on chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, keeping power draw predictable during sustained workloads in densely populated configurations.

أبرز المميزات

  • 96 GB capacity lets you run large workloads in fewer slots
  • DDR5 6400 speed with CL52 latency delivers rated throughput on supported boards
  • Registered ECC design corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits Supermicro H13SRA-F and H13SRA-TF memory slots

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Does the CL52 latency cause a bottleneck during sustained server workloads?

CL52 is the rated CAS latency for this DDR5 6400 module. It represents the timing the memory controller expects for stable operation at full speed.

Will the 1.1V modules run hot or loud in a fully populated Supermicro H13SRA-F chassis?

These registered ECC RDIMMs operate at 1.1V with no heat spreader. Thermal output depends on your server's airflow design and fan curves.

Must the motherboard support 2Rx4 registered ECC DDR5 to use this 96GB kit?

Yes. The Supermicro H13SRA-F and H13SRA-TF require 288-pin DDR5 RDIMMs with registered ECC. This 2Rx4 1.1V CL52 kit matches that specification.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.