نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 128GB DDR5 6400MHz PC5-51200 2Rx4 CL52 1.1V 288-Pin ECC Registered RDIMM memory upgrade

SKU CH-7169-0X138

A 128 GB DDR5 registered ECC module running at 6400 MHz with CL52 latency and 1.1 V for Supermicro H13SRA motherboards

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 128GB

عرض 6 تكوينات إضافية
  • Full-speed 128 GB DDR5-6400 operation with exact CL52 timing the memory controller expects
  • Registered 2Rx4 ECC design offloads the controller so every slot runs fully populated at rated capacity
  • 1 V DDR5 voltage and 288-pin RDIMM form factor match the board's electrical and mechanical requirements
  • Verified fit for Supermicro H13SRA-F and H13SRA-TF motherboards with correct population rules
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability for production workloads

Exact DDR5-6400 Registered ECC Module

This 128 GB DDR5 RDIMM runs at 6400 MHz (PC5-51200) with a CL52 latency and 1.1 V operating voltage. The 2Rx4 registered design adds a buffer that lets the memory controller drive every populated slot at full rated speed. It is built for Supermicro H13SRA-F and H13SRA-TF motherboards that require 288-pin registered ECC memory.

DDR5 RDIMM Population Rules Apply

Registered DDR5 modules still follow the motherboard's qualified-vendor list and slot-population order; exceeding the approved ranks per channel or mixing ranks can prevent the system from posting at 6400 MHz. The board's memory controller must also support 128 GB single-DIMM capacity, which varies by BIOS revision and CPU SKU. Always verify the manual before installing.

2Rx4 Rank Determines Full-Speed Operation

The dual-rank x4 organisation is the single specification that decides whether this module will run at its rated 6400 MHz when all slots are filled. A different rank or width would change the electrical load and could force the controller to downclock the memory bus.

أبرز المميزات

  • Full-speed 128 GB DDR5-6400 operation with exact CL52 timing the memory controller expects
  • Registered 2Rx4 ECC design offloads the controller so every slot runs fully populated at rated capacity
  • 1 V DDR5 voltage and 288-pin RDIMM form factor match the board's electrical and mechanical requirements
  • Verified fit for Supermicro H13SRA-F and H13SRA-TF motherboards with correct population rules
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability for production workloads

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Should I pick the 128 GB 2Rx4 kit or look for a different capacity for my Supermicro H13SRA-F?

This kit is a single 128 GB 2Rx4 Registered ECC RDIMM. Check your motherboard manual for the maximum capacity per slot and the approved population order before deciding.

Will the DDR5-6400 CL52 rating actually run at 6400 MT/s in my H13SRA-TF?

The module is specified at 6400 MT/s (PC5-51200) with CL52 at 1.10 V. Your board must support DDR5-6400 and the 2Rx4 Registered layout to reach that speed; otherwise it will downclock to the highest common setting.

Does the 288-pin RDIMM interface limit how many modules I can install per channel?

The 288-pin Registered DDR5 RDIMM form factor is required by the H13SRA-F and H13SRA-TF. Each module presents a 2Rx4 load; total DIMMs per channel is governed by the motherboard's memory-controller limits, not the pin count itself.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.