Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

NEMIX RAM

NEMIX RAM 128GB DDR5 6400MHz PC5-51200 2Rx4 CL52 1.1V 288-Pin ECC Registered RDIMM memory upgrade

SKU CH-7169-0X138

A 128 GB DDR5 registered ECC module running at 6400 MHz with CL52 latency and 1.1 V for Supermicro H13SRA motherboards

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • Full-speed 128 GB DDR5-6400 operation with exact CL52 timing the memory controller expects
  • Registered 2Rx4 ECC design offloads the controller so every slot runs fully populated at rated capacity
  • 1 V DDR5 voltage and 288-pin RDIMM form factor match the board's electrical and mechanical requirements
  • Verified fit for Supermicro H13SRA-F and H13SRA-TF motherboards with correct population rules
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability for production workloads

Exact DDR5-6400 Registered ECC Module

This 128 GB DDR5 RDIMM runs at 6400 MHz (PC5-51200) with a CL52 latency and 1.1 V operating voltage. The 2Rx4 registered design adds a buffer that lets the memory controller drive every populated slot at full rated speed. It is built for Supermicro H13SRA-F and H13SRA-TF motherboards that require 288-pin registered ECC memory.

DDR5 RDIMM Population Rules Apply

Registered DDR5 modules still follow the motherboard's qualified-vendor list and slot-population order; exceeding the approved ranks per channel or mixing ranks can prevent the system from posting at 6400 MHz. The board's memory controller must also support 128 GB single-DIMM capacity, which varies by BIOS revision and CPU SKU. Always verify the manual before installing.

2Rx4 Rank Determines Full-Speed Operation

The dual-rank x4 organisation is the single specification that decides whether this module will run at its rated 6400 MHz when all slots are filled. A different rank or width would change the electrical load and could force the controller to downclock the memory bus.

Najważniejsze cechy

  • Full-speed 128 GB DDR5-6400 operation with exact CL52 timing the memory controller expects
  • Registered 2Rx4 ECC design offloads the controller so every slot runs fully populated at rated capacity
  • 1 V DDR5 voltage and 288-pin RDIMM form factor match the board's electrical and mechanical requirements
  • Verified fit for Supermicro H13SRA-F and H13SRA-TF motherboards with correct population rules
  • Major OEM Samsung, Micron or Hynix chips deliver enterprise-grade stability for production workloads

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Should I pick the 128 GB 2Rx4 kit or look for a different capacity for my Supermicro H13SRA-F?

This kit is a single 128 GB 2Rx4 Registered ECC RDIMM. Check your motherboard manual for the maximum capacity per slot and the approved population order before deciding.

Will the DDR5-6400 CL52 rating actually run at 6400 MT/s in my H13SRA-TF?

The module is specified at 6400 MT/s (PC5-51200) with CL52 at 1.10 V. Your board must support DDR5-6400 and the 2Rx4 Registered layout to reach that speed; otherwise it will downclock to the highest common setting.

Does the 288-pin RDIMM interface limit how many modules I can install per channel?

The 288-pin Registered DDR5 RDIMM form factor is required by the H13SRA-F and H13SRA-TF. Each module presents a 2Rx4 load; total DIMMs per channel is governed by the motherboard's memory-controller limits, not the pin count itself.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.