BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214.99 US$
0.00276429BTC
متوفر
NEMIX RAM
NEMIX RAM CSE-GS7A-000NBP3 128GB (2x64GB) DDR5 4800 CL40 ECC RDIMM memory upgrade
A 128 GB DDR5 4800 CL40 ECC registered kit built for Supermicro workstations and servers
- Capacity128GB (2 x 64GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB capacity with two 64 GB modules
- DDR5 4800 speed rated at PC5-38400
- ECC registered design for data integrity
- 1 V operation reduces power draw
- Validated for Supermicro SYS-751A-I workstation
128GB DDR5 ECC RDIMM Kit
This 128GB kit contains two 64GB DDR5 4800 registered DIMMs with ECC and CL40 latency. It is built for the SuperMicro SuperWorkstation SYS-751A-I and the Super X13DAI-T motherboard. IT professionals and system integrators who need validated, high-density memory for these specific platforms will find it ready to install.
DDR5 4800 Registered ECC Limits
DDR5 4800 sets the maximum data rate at 4800 MT/s with a base voltage of 1.10V. Registered ECC modules add a clock cycle for address parity and command buffering, so the memory controller must support registered operation. Mixing registered with unbuffered DIMMs or exceeding the platform's qualified speed will prevent boot or cause instability.
Two-Module 2Rx4 Population Rule
The kit delivers the full 128GB capacity only when both 2Rx4 modules occupy the correct slots for the target platform. A single 64GB module leaves half the capacity unused, and adding a third DIMM of a different rank or speed breaks the qualified configuration. Builders who need a different total capacity or rank layout must select a separate kit.
أبرز المميزات
- 128 GB capacity with two 64 GB modules
- DDR5 4800 speed rated at PC5-38400
- ECC registered design for data integrity
- 1 V operation reduces power draw
- Validated for Supermicro SYS-751A-I workstation
المواصفات
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
أسئلة حول هذا المنتج
Should I choose the 128 GB kit with two 64 GB modules or a different capacity for my SuperMicro SYS-751A-I?
The kit provides 128 GB total across two 64 GB DDR5 4800 RDIMMs. Match the capacity to your workload and the motherboard's maximum supported memory.
What does DDR5 4800 (PC5-38400) mean for actual throughput in a SuperMicro X13DAI-T?
The modules run at 4800 MT/s with CL40 latency at 1.10 V. Registered ECC buffering adds one cycle but improves signal integrity for sustained server workloads.
How does the 288-pin RDIMM interface and PC5-38400 rating limit performance in this platform?
The 288-pin DDR5 RDIMM form factor fits the X13DAI-T slots. PC5-38400 defines the 4800 MT/s data rate; the registered buffer and ECC operate within that JEDEC specification.
أيضًا في هذا القسم
عملاء قارنوا هذه المنتجات
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
