我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM CSE-GS7A-000NBP3 128GB (2x64GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-9BEC-FZCPJ MPN CSE-GS7A-000NBP3

A 128 GB DDR5 4800 CL40 ECC registered kit built for Supermicro workstations and servers

  • Capacity128GB (2 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB capacity with two 64 GB modules
  • DDR5 4800 speed rated at PC5-38400
  • ECC registered design for data integrity
  • 1 V operation reduces power draw
  • Validated for Supermicro SYS-751A-I workstation

128GB DDR5 ECC RDIMM Kit

This 128GB kit contains two 64GB DDR5 4800 registered DIMMs with ECC and CL40 latency. It is built for the SuperMicro SuperWorkstation SYS-751A-I and the Super X13DAI-T motherboard. IT professionals and system integrators who need validated, high-density memory for these specific platforms will find it ready to install.

DDR5 4800 Registered ECC Limits

DDR5 4800 sets the maximum data rate at 4800 MT/s with a base voltage of 1.10V. Registered ECC modules add a clock cycle for address parity and command buffering, so the memory controller must support registered operation. Mixing registered with unbuffered DIMMs or exceeding the platform's qualified speed will prevent boot or cause instability.

Two-Module 2Rx4 Population Rule

The kit delivers the full 128GB capacity only when both 2Rx4 modules occupy the correct slots for the target platform. A single 64GB module leaves half the capacity unused, and adding a third DIMM of a different rank or speed breaks the qualified configuration. Builders who need a different total capacity or rank layout must select a separate kit.

商品特色

  • 128 GB capacity with two 64 GB modules
  • DDR5 4800 speed rated at PC5-38400
  • ECC registered design for data integrity
  • 1 V operation reduces power draw
  • Validated for Supermicro SYS-751A-I workstation

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K2
Capacity128GB (2 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

商品問答

Should I choose the 128 GB kit with two 64 GB modules or a different capacity for my SuperMicro SYS-751A-I?

The kit provides 128 GB total across two 64 GB DDR5 4800 RDIMMs. Match the capacity to your workload and the motherboard's maximum supported memory.

What does DDR5 4800 (PC5-38400) mean for actual throughput in a SuperMicro X13DAI-T?

The modules run at 4800 MT/s with CL40 latency at 1.10 V. Registered ECC buffering adds one cycle but improves signal integrity for sustained server workloads.

How does the 288-pin RDIMM interface and PC5-38400 rating limit performance in this platform?

The 288-pin DDR5 RDIMM form factor fits the X13DAI-T slots. PC5-38400 defines the 4800 MT/s data rate; the registered buffer and ECC operate within that JEDEC specification.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。