نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول

NEMIX RAM

NEMIX RAM DDR5 5600 96GB (6x16GB) ECC RDIMM CL46 1.1V Supermicro H13SSH

SKU CH-P0KR-MM8DK

96 GB DDR5 server memory kit with six 16 GB ECC registered DIMMs at 5600 MHz, CL46, 1.1 V, validated for Supermicro H13SSH

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96GB total capacity from six 16GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency for rated data throughput
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1V operation at standard DDR5 voltage for efficient power draw
  • Verified fitment with Supermicro H13SSH motherboard using 288-pin RDIMM form factor

Exact-match DDR5 kit for Supermicro H13SSH

This 96 GB kit contains six 16 GB DDR5 5600 Registered ECC RDIMMs built to the exact rank, voltage and timing the server memory controller expects so the full capacity is recognised at rated speed. It is intended for administrators upgrading or populating a Supermicro H13SSH motherboard.

Registered RDIMM form factor with ECC

Each module uses the 288-pin Registered DIMM layout this board requires rather than UDIMM or SODIMM and operates at 1.10 V with CL46 latency. Registered architecture offloads the memory controller so every slot runs fully populated while ECC catches and corrects single-bit errors on the fly preventing silent data corruption.

DDR5 5600 interface limits

The DDR5 5600 standard sets the maximum transfer rate and timing envelope these modules operate within so bandwidth and latency are bounded by that specification. Population rules and maximum supported capacity vary by motherboard revision so the system manual must be consulted before installation to confirm supported configurations.

أبرز المميزات

  • 96GB total capacity from six 16GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency for rated data throughput
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1V operation at standard DDR5 voltage for efficient power draw
  • Verified fitment with Supermicro H13SSH motherboard using 288-pin RDIMM form factor

المواصفات

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

أسئلة حول هذا المنتج

Does DDR5-5600 (PC5-44800) run at its rated 5600 MT/s on the Supermicro H13SSH?

Yes, the kit is spec-matched to the H13SSH memory controller so the six 1Rx8 modules are recognised at full capacity and operate at DDR5-5600 without down-clocking.

What physical slot and form factor do these modules need?

Each module is a 288-pin DDR5 RDIMM; the H13SSH requires Registered DIMMs, not UDIMM or SODIMM, and all six slots must accept that exact form factor.

How are the six DIMMs installed, and which step is often missed?

Follow the motherboard manual for the approved population order — typically filling specific channels first — because installing all six without that sequence can prevent the system from posting.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.