SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00496341BTC
Auf Lager
NEMIX RAM
NEMIX RAM DDR5 5600 96GB (6x16GB) ECC RDIMM CL46 1.1V Supermicro H13SSH
96 GB DDR5 server memory kit with six 16 GB ECC registered DIMMs at 5600 MHz, CL46, 1.1 V, validated for Supermicro H13SSH
- Capacity96GB (6 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 96GB total capacity from six 16GB modules for dense server workloads
- DDR5 5600 speed with CL46 latency for rated data throughput
- Registered ECC design corrects single-bit errors and stabilises fully populated slots
- 1V operation at standard DDR5 voltage for efficient power draw
- Verified fitment with Supermicro H13SSH motherboard using 288-pin RDIMM form factor
Exact-match DDR5 kit for Supermicro H13SSH
This 96 GB kit contains six 16 GB DDR5 5600 Registered ECC RDIMMs built to the exact rank, voltage and timing the server memory controller expects so the full capacity is recognised at rated speed. It is intended for administrators upgrading or populating a Supermicro H13SSH motherboard.
Registered RDIMM form factor with ECC
Each module uses the 288-pin Registered DIMM layout this board requires rather than UDIMM or SODIMM and operates at 1.10 V with CL46 latency. Registered architecture offloads the memory controller so every slot runs fully populated while ECC catches and corrects single-bit errors on the fly preventing silent data corruption.
DDR5 5600 interface limits
The DDR5 5600 standard sets the maximum transfer rate and timing envelope these modules operate within so bandwidth and latency are bounded by that specification. Population rules and maximum supported capacity vary by motherboard revision so the system manual must be consulted before installation to confirm supported configurations.
Besonderheiten
- 96GB total capacity from six 16GB modules for dense server workloads
- DDR5 5600 speed with CL46 latency for rated data throughput
- Registered ECC design corrects single-bit errors and stabilises fully populated slots
- 1V operation at standard DDR5 voltage for efficient power draw
- Verified fitment with Supermicro H13SSH motherboard using 288-pin RDIMM form factor
Technische Daten
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K6 |
| Capacity | 96GB (6 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Fragen zu diesem Artikel
Does DDR5-5600 (PC5-44800) run at its rated 5600 MT/s on the Supermicro H13SSH?
Yes, the kit is spec-matched to the H13SSH memory controller so the six 1Rx8 modules are recognised at full capacity and operate at DDR5-5600 without down-clocking.
What physical slot and form factor do these modules need?
Each module is a 288-pin DDR5 RDIMM; the H13SSH requires Registered DIMMs, not UDIMM or SODIMM, and all six slots must accept that exact form factor.
How are the six DIMMs installed, and which step is often missed?
Follow the motherboard manual for the approved population order — typically filling specific channels first — because installing all six without that sequence can prevent the system from posting.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 $
0.00094953BTC
Auf Lager